Spaenaur Catalog 14

Fujilok Self-Locking Hex Nuts

Inch Pouce

Écrous hexagonaux autobloquants Fujilok

REGULAR SERRATED FLANGE LOCKNUTS These items are compliant to all requirements of ASME B18.16.4 for Regular Serrated Flange Locknuts, except that they are not case hardened.

Flange Dia. D Max. Min. 0.500 0.480 0.594 0.574 0.680 0.660 0.750 0.937 0.910 1.031 1.000

Across Flats B Max. Min. 0.375 0.365 0.438 0.428 0.500 0.489 0.562 0.688 0.675 0.750 0.736

Size A

Thickness C Max. Min.

Seating Torque In.-Lb.

Wrench Height Min.

Proof Load Min. Lb.

PKG QTY.

Spaenaur No.

C

C

0.219 0.203 0.236 0.222 0.283 0.268 0.347 0.395 0.375 0.458 0.437

1650

70

100

0.13

#10-24

224-015

N-49

2900 4700 5200

108 168 180

100 100

1/4-20

0.14

224-G03-2P 5/16-18 5/16-24 N-50

0.17

N-70

3/8-16

0.23

100

7000

324

HN-196 HN-198 224-016 HN-145

7/16-14 7/16-20

9550

480 516 744 816

0.26

100

10,700 12,800 14,400

1/2-13 1/2-20

0.31

50

Will fit nearly all North American CARS and TRUCKS STEELWHEEL NUTS

Wheel Nut - Stainless Steel Capped (Zinc Plated with Stainless Steel Cap) GENERAL MOTOR PRODUCTS

Zinc plated finish

Right Hand Thread

PKG QTY. 10

HEX

PKG QTY.

DIMENSION

SPAENAUR

(across flats) HEIGHT

THREAD

No.

7/16"-20 Rt. Hand 3/4"

9/16" 9/16"

50 50 25 10 10

167-001

167-C01-1W 1/2"-20 Rt. Hand 3/4"

167-013 Thread Size 7/16"-20 (414188) SPAENAUR No.

1/2"-20 Rt. Hand 13/16" 3/4"-16 Rt. Hand 1-1/2" 3/4"-16 Left Hand 1-1/2"

5/8" 7/8" 7/8"

167-005 167-007 167-008

COARSE THREAD FINE THREAD

WIDTH

STEEL Alloy L • 9 STOVER ® LOCKNUT

(U.N.C.)

(U.N.F.)

ACROSS

FLAT THICKNESS PKG.

NOMINAL

SPAENAUR

SPAENAUR

QTY.

MAX./MIN.

MAX./MIN. .301/.281" .336/.316" .400/.380" .449/.429" .516/.496" .580/.560" .660/.640"

SIZE

THD.

THD.

No.

No.

20 18 16 14 13 12 11 10

28 .437/.428" 24 .500/.489" 24 .562/.551" 20 .687/.675" 20 .750/.736" 18 .875/.861" 18 .937/.922"

100

1/4

172-001 172-002

172-R03-1T

50 50 25 25 25 25 20 15 10 10 10 10

5/16

172-015 172-016 172-017 172-018 172-019 172-021 172-022 172-023 172-024 172-025 172-026

3/8

172-R02-1N

7/16

172-004 172-005 172-006 172-007 172-008 172-009 172-010 172-011 172-012 172-013

1/2

9/16

5/8 3/4 7/8

172-R01-1C

16 1.125/1.088" .767/.747" 14 1.312/1.269" .887/.867" 14 1.500/1.450" 1.023/1.003" 12 1.687/1.631" 1.181/1.161" 12 1.875/1.812" 1.277/1.257" 12 2.250/2.175" 1.531/1.511"

CATALOG 14 CATALOG 14.12

9 8 7 7 6

1

Cadmium Plated and Waxed Yellow Dichromate Finish

1-1/8 1-1/4 1-1/2

Rockwell Hardness 1/4"-5/8" Dia. C28-34 3/4"-1-1/2" Dia. C32-38

NOTE: L • 9 STOVER ® LOCKNUTS are recommended for use exclusively with L • 9 Bolts and L • 9 Washers. The complete L • 9 ® FASTENING SYSTEM appears on pages B147 to B150.

C23

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com

02 JAN 2024