Section L

Compartment / Rear Door Dead Bolt Locks Serrures à pêne dormant de compartiment / porte arrière Dead Bolt COMPARTMENT DOOR LOCKS Dimensions: Easily installed on Metal or Wood Doors 6-1/4" length of centre case 2-1/4" width of centre case 1-5/16" thickness of centre case (Including rod pins) 9/32" diameter mounting holes in centre case 5/16" square hole for handle 2-1/4" centre of handle hole to end of centre latch on No. 5647 only 1-3/4" x 2-1/4" rod guides 13/64" diameter mounting holes in rod guides 3/8" diameter of rods 97-1/4" overall length of lock ( rod end to rod end) 48-5/8" centre of handle hole to rod end (upper or lower) Zinc Finish

Inch Pouce

Slam Action Medium Duty DOOR LOCK

Steel, Plain Finish

Upper Bolt (Flush Type)

D-3203LA Spaenaur No.

(Mfr. # 565699-52U)

PROJECTION WELD 2 PLACES AS SHOWN

.210 Ø 4 HOLES

.31

.75

1.38

2.00

.31

.69

2.63 1.94

.34

.45

1/4-20

45 °

Weight: D-4022ZP 3 lbs., 13 oz. each D-4049 4 lbs., 2 oz. each

.50

D-4022ZP Spaenaur No. (Mfr. #5646U-25) Zinc Plated Two-point lock with flat steel anti rattle spring in rod guides.

D-4049 (Mfr. #5647) Zinc Plated Three-point lock with flat steel anti rattle springs in rod guides. Spaenaur No.

.14

.06

All screw holes in flanges for # 10 screws. 3-3/8" length of centre case 5/16" square hole for handle Dimensions: 2" width of slide bolt cases 2-5/8" length of slide bolt cases 3/4" width of slide bolts 11/16" projection of slide bolts 2" width of centre case

D-4048-1 Centre Lock only. For D-4049 shown at right. Spaenaur No.

PKG QTY. 1

PKG QTY. 1

Universal Cam Type REAR DOOR LOCK

LIGHT-DUTY

Spaenaur No.

19/32"

Dead Bolt LOCK

D-3242R Right D-3242L Left

L

3" 1-3/4"

D-4033 (Mfr. #2-5654X) Spaenaur No.

3-1/8"

(Mfr. #5611 R & L)

4-1/2"

13/32"DIA. 6 MOUNTING HOLES

(Right-hand shown)

Three-point lock. For metal or wood doors. All-steel construction. Easily attachable by means of screws, bolts, rivets or welding. Simplified construction. Rods attachable or removable without tools. Simply place over pins in a horizontal position - turn to vertical positions and attach rod guides. Dimensions: 4-1/4" length centre case 2" width centre case

PKG QTY. 1

with narrow 1-1/4" wide keepers for use with the narrow headers and sills of many modern designs.

3/4"STANDARD PIPE NOT FURNISHED

7/16" SQ. — 2 MOUNTING HOLES 15-9/32" 8-7/32"

Zinc or Plain Finish Our Option.

1-1/4"

1/2" SQ. PADLOCK EYE

7/16 DIA. C' SUNK 82 ° TO 3/4 DIA. 4 MOUNTING HOLES

27/64" thickness centre case 5/16" square hole for handle 1-3/4" centre handle to end of centre latch

STEEL Zinc Plated

CATALOG 14 CATALOG 14.02 2018/12/05

NOTE SPECIAL NARROW WIDTH KEEPERS

1/2" x 1-13/16" rod guides 5/16" rod guide diameter 34-3/4" length centre of handle hole over end of rod Weight: 2 lbs. each

RIGHT HAND INSTALLATION SHOWN

1-1/4"

4-3/4"

5/8"

1-13/16"

7/8"

6"

PKG QTY. 1

Weight - 11-1/2 lbs.

L60

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 27 NOV 2018