Section L

Compartment Dead Bolt Latch Loquet de compartiment à pêne dormant

Inch Pouce

(2 and 3 Point) with Folding “T” Handles

This improved dead-bolt latch for compartment or cabinet doors has a folding handle with a concealed Stainless Steel spring which holds handle in folded position. The shank is offset for mounting the latch close to edge of door. Both the 2 point and 3 point key-locking versions are delivered with cylinders attached and one key furnished. The key actuates the bolt, which slides into the notch in the circular plate. (See illustration on this page.) After opening the door, the key can be turned to the locked position. Then when the door is closed and the handle is again turned, the locking bolt will drop automatically into the locked position. The centre case is installed in a simple cut-out (near the edge of door, if desired) and attached by bolts, screws, or welding.

Replacement Key Cylinder 099-035 (Mfr. #15621) Spaenaur No. (Mfr. #4875) Zinc Plated Steel 3 Point Key-Locking (Shown) D-4062 Spaenaur No.

D-4021 (Mfr. #4857) 2 Point Non Key-Locking (Shown) Spaenaur No.

Zinc Plated STEEL PKG QTY. 1

PKG QTY. 1

D-4065 (Mfr. #4876) 2 Point Key-Locking Weight: 2 lbs. 9 oz. each Zinc Plated STEEL Spaenaur No.

The rods are attached or detached with unusual ease as shown here. With the centre bolt in the unlocked position, the rods are slipped over the formed projections, turned at right angles and the rod guides are attached. Latch does not have to be accurately centered for locking. After key is turned to lock position, spring loaded lock slide will seat automatically when the handle is turned to secure latch.

L

L

PKG QTY. 1

.56 R

SUGGESTED OUTLINE OF CUTOUT IN PANEL TO RECEIVE RECEPTACLE

.38 R

.88

3 Point

.75 TOTAL TRAVEL

2.25

1.81

.50

.50

NOTE Drawings and dimensions on this page are for reference only. For manufacturing production or tooling purposes, obtaincurrent engineering print from SPAENAUR .

.38 R

.12

34.00

34.00

.75 .75 3.00

.41

.31 DIA.

1.50 .19

.12 WHEN ROD IS REVERSED, BRINGING OFFSET TO TOP, THE .69 DIMENSION IS INCREASED TO .88.

.87 .75

.69

OFFSET

.05

4.75

CATALOG 14

.87

.38

4.75

4.88

3.75

2 Point

L59

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018