Section L

Swell Latches

Metric Métrique

Loquets à expansion

Swell Action Latches Light Duty Version • Accommodates misalignment between door and frame • Latches in any frame thickness, blind application, glass, plastic or metal

Material and Finish HAND L E , WASHE R an d ACO R N NUT: Nylon, black. TEE SHAFT: Glass filled nylon, black. BUSHING: SBR Rubber, black.

DOOR

FRAME

• Resists vibration • Sound deadening

RATED AND ULTIMATE LOAD

R 2.4 (.09)

ACORN NUT M6 THREAD

39 (1.53)

HANDLE/TEE SHAFT SUB ASSEMBLY

BUSHING

11.5 (.45)

23 (.91) OPEN

16.7 (.66)

1.5 (.06) TO 4.8 (.19)

39 (1.53)

Use

Adjustment

SPAENAUR No. 097-408 Mfr. #19-54-01

Door Thickness

Washer? Required?

1.7 ± 0.2 (.07 ± .01)

Ye s Ye s

No

1.9 to 2.3 (.08 to .09)

Yes

2.5 ± 0.2 (.10 ± .01)

PKG QTY. 1

No No

No

2.7 to 4.8 (.11 to .19)

Yes

Panel Preparation

L

L

OPTIONAL RECESSED DOOR PREPARATION: 11.5±0.5 (.45±.02) DEEP

Ø13.7 ± 0.3 (.54 ± .01) for frame thickness up to 3.2 (.13) Ø14.1 ± 0.3 (.56 ± .01) for frame thickness 3.2 (.13) to 4.8 (.19)

56±0.5 (2.20±.02)

5.2±0.5 (.20±.02)

millimeter (inch) Dimensions without tolerances are for reference only.

18±0.5 (.71±.02)

3.4±0.5 (.13±.02)

R

TYP.

Ø 6.7 ± 0.3 (.26 ± .01)

OPTIONAL FLATS

FRAME

DOOR

+0.1 -0.0

) +.004 -.000

5.2

(.205

Installation 1. Prepare hole in door as shown. Optional flats in door preparation will prevent latch rotation. 2. Prepare hole frame as shown. 3. With handle in open (unlatched) position, insert tee shaft through door, then slide washer (if required) over the tee shaft. 4. Slide bushing over tee shaft and secure with acorn nut. For “No Adjustment” door thickness, run nut until fully seated on tee shaft [ 0.5 N•m (4.5 in.lbs.) Max. Torque]. For other door thickness, adjust nut for satisfactory latching action.

ACORN NUT

CATALOG 14

5. Check the free expanded diameter of bushing. When latched, but not engaged in frame, bushing diameter should be 15.5 (.61) minimum to 16.5 (.65) maximum.

BUSHING

USE WASHER PROVIDED WHEN REQUIRED

HANDLE AND SHAFT SUB-ASSEMBLY

L143 19 jan 2018

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com