Section L

Swell Latches

Metric Métrique

Loquets à expansion

Swell Latches Heavy Duty Version • Accommodates misalignment between door and frame • Latches in any frame thickness, blind application, glass or plastic • Resists vibration

Material and Finish HANDLE: Die cast zinc, black powder coated. SHAFT: Brass, black organic coating. PIN: 303 Stainless steel, passivated with black oxide coating. NUT: Nylon, black. WASHER: Acetal, black. BUSHING: SBR rubber, black.

Frame Thickness

6.4 (.25) MAX

16 (.63) Ø 19 (.75)

FRAME

DOOR OR OUTER PANEL

BUSHING NUT

WASHER

HANDLE AND SHAFT SUB-ASSEMBLY

SHAFT 5/16-24 Thread

SPAENAUR No. 097-410 Mfr. #19-14-10

57 (2.25)

55 (2.16)

Product Strength Guidelines Frame Thickness Rated Load* (Short Term) 1.2 to 3.2 (.05 to .13) 330 N (75 lbs.) 3.2 to 4.8 (.13 to .19) 660 N (150 lbs.) 4.8 to 6.4 (.19 to .25) 550 N (125 lbs.) 6.4 (.25) and Up 220 N (50 lbs.) PKG QTY. 1

1.2 (.05)

28 (1.10) (LATCHED)

29.3 (1.15) (LATCHED)

63 (2.48) (OPEN)

33.6 (1.32) (OPEN)

13 (.50)

* Latches should not be loaded continuously at values near to the short term rated load.

Installation 1. Prepare shaped hole in door or outer panel and round hole in frame.

2. With handle in open position insert shaft through washer then hole in door. Pass bushing over shaft and secure with nylon nut.

NYLON NUT

DOOR OR OUTER PANEL

L

FRAME

WASHER

Ø 8 +0.1 -0.0

) +.004 - .000

(.316

BUSHING

6.5 +0.1 -0.0

Ø K

+.004 - .000 (.257 )

HANDLE AND SHAFT SUB-ASSEMBLY

OPTIONAL: Round hole installation. CAUTION!! Handle orientation will shift with use and loosen.

3. Adjust nylon nut to provide adequate expansion of the bushing when the handle is lowered.

MAX. misalignment between ’s of panel hole and frame hole. CL

+0.5 -0.0

+.031 -.000

(

)

Frame Thickness Ø K

1.2 to 3.2 (.05 to .13) 3.2 to 4.8 (.13 to .19) 4.8 to 6.4 (.19 to .25)

19 (.750) 19.5 (.766)

0.9 (.035) 1.1 (.045) 1.3 (.050) 1.5 (.060)

millimeter (inch) Dimensions without tolerances are for reference only.

CATALOG 14

20 (.781) 6.4 (.25) and Up 20.5 (.797)

Latch should not be operated at temperatures below 0 ° C (32 ° F).

L142 19 Jacket 2018

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com