Spaenaur Catalog 14

Wire Wheel Brushes Wire Wheel Brushes / Flange Kits Roues brosses métalliques / Kits de brides

Inch Pouce

Carbon Wire .020 General purpose wire for cleaning and deburring.

Narrow work face allows for easy access to confined areas. Ideal for weld and bead cleaning on pipes and vessels.

Use on Angle Grinders

For Cleaning & Conditioning

DIMENSIONS MAX Face Dia. x Width x Arbor RPM CARBON WIRE 6-1/2" x 1/4" x 5/8"-11 12,000 876-2045 Stringer Bead Wire Wheels

Wire Cup Brushes

Use on Angle Grinders

For Cleaning & Conditioning

Crimped Wire Cups

Carbon Wire .014, .020

DIMENSIONS MAX

CARBON WIRE

Dia. x Thread RPM .014

.020

876-2047 876-2048

— —

2-3/4" x 5/8"-11 12,500 2-3/4" x M14-2.0 12,500

General purpose wire for cleaning and deburring.

— 876-2049

5" x 5/8"-11

7,000

Knotted - Knock-Off Bridle Bridles restrain the knots, providing flare control and prevent premature wire breakage. As the brush wears down removing the bridle will expose new wire.

Knotted - Knotted wire cup brushes are perfect for heavy duty cleaning and rough scale removal.

Knotted Wire Cups

DIMENSIONS Dia. x Thread

MAX CARBON WIRE STAINLESS WIRE

Use on Angle Grinders

RPM

.020

.020

876-2050 876-2057 876-2051 876-2052 876-2054

—

2-3/4" x 5/8"-11

12,500

876-2058

3" x 5/8"-11 Knock-Off Bridle 11,000

—

8,500 8,500 6,500

4" x 5/8"-11 Knock-Off Bridle 5" x 5/8"-11 Knock-Off Bridle 6" x 5/8"-11 Knock-Off Bridle

For Cleaning & Conditioning

P

876-2053

—

Wire Wheel Brushes

Carbon Wire .014 General purpose wire for cleaning and deburring.

Use on Bench Grinders

DIMENSIONS MAX Face Dia. x Width x Hole Sizes RPM CARBON WIRE 6" x 1" x 5/8" and 1/2" 6,000 876-2055 8" x 1" x 5/8" and 1/2" 4,500 876-2056 Crimped Wire Wheel Brushes

P

For Cleaning & Conditioning

Reuseable Flange Assembly Kit, consists of backing flange and centre nut/flange. 876-2060 1-3/4"Dia. x 5/8-11 Arbor

CATALOG 14

Type 1 cutoff wheels must be mounted between properly relieved flanges of equal diameter and matching bearing surfaces. Such flanges must be at least 1/4 of the wheel diameter. Do not use this flange assembly with wheels larger than 5" diameter. Right angle grinders may not come equipped with Type 1 flanges as standard equipment. For use with 4-1/2" and 5" diameter thin* cutoff wheels on angle grinders. Can be used with Type 1 or Type 27 thin* cutoff wheels. *Wheel Thickness .045" thru 1/8"

Machine Guard

Spacer/Washer* Backing Flange

Center Nut/Flange

Type 1 Thin Cutoff Wheel

Type 27 Thin Cutoff Wheel

*Spacer/Washer may be needed to ensure proper tightening of wheel.

All items on this page PKG QTY. 1

P110

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018