Spaenaur Catalog 14

Disques abrasifs et roues de ponçage Abrasive Discs & Wheels Disques abrasifs et roues

Inch Pouce

Depressed Centre Grinding Wheels

TYPE 27

Aggressive grinding - longest life. Ideal for most metals including stainless and other hard alloys. An excellent "all-purpose" spec. DIMENSIONS MAX METAL, STAINLESS Dia. x Thk. Abor RPM Fast Grind A30S 4-1/2" x 1/4" x 7/8" 13,300 876-1950 5" x 1/4" x 7/8" 12,000 876-1951

Reinforced with three full diameters of high tensile fiberglass.

For Use with METAL, STAINLESS A30S - Fast Grind

Use on Angle Grinders

For Grinding ONLY

Depressed Centre Cutoff Wheels

TYPE 27

For Use with METAL, STAINLESS A30S - Fast Cut

These extra heavy duty 1/8" thick wheels are designed specifically for cutting applications.

Fast cutting with good life. Ideal for most metals, including stainless and other hard alloys. An excellent "all-purpose" spec. DIMENSIONS MAX METAL, STAINLESS Dia. x Thk. Abor RPM Fast Cut A30S 4-1/2" x 1/8" x 7/8" 13,300 876-1954 5" x 1/8" x 7/8" 12,000 876-1955 The razor thin .045" delivers the fastest cutting action on carbon steel, stainless and other alloys - including aluminum, brass, bronze and cast iron. Cuts sheet, pipe, rod, cable and all profiles. DIMENSIONS MAX METAL, STAINLESS Dia. x Thk. Abor RPM Extra Fast Cut A60SST-27 5" x .045" x 7/8" 12,000 876-1953

Use on Angle Grinders

For Cutoff ONLY

Thin Depressed Centre Cutoff Wheels

TYPE 27

For Use with METAL, STAINLESS A60SST-27 - Extra Fast Cut

Use on Angle Grinders

For Cutoff ONLY

Bench Grinder Wheels

TYPE 1

Precision Balanced for vibration-free running.

Use on Bench Grinders

Each wheel comes with a set of nested reduction bushing at no additional cost.

For Grinding ONLY

P

For Use with METAL, STAINLESS Aluminum Oxide -

P

Vitrified bonded aluminum oxide wheel for general purpose grinding of carbon steel, stainless steel and other alloys.

DIMENSIONS MAX METAL, STAINLESS (ALUMINUM OXIDE GRAIN) Dia. x Thk. Abor RPM Coarse A24 Med./Fine A60 Fine A80 6" x 1" x 1" 4,138 876-1957 876-1958 876-1959 — 8" x 1" x 1-1/4" 3,600 876-1961 876-1962

CATALOG 14

For Use with NONFERROUS Green Silicon Carbide -

The toughest abrasive for sharpening or grinding hard or very soft materials. Extremely sharp grain for faster, burr-free cutting on tungsten carbide, brass, bronze, aluminum and masonry.

DIMENSIONS MAX METAL, STAINLESS (Green Silicon Carbide Grain) Dia. x Thk. Abor RPM Coarse CG60 Medium CG80 Fine CG120 6" x 1" x 1" 4,138 876-1964 876-1965 8" x 1" x 1-1/4" 3,600 876-1967 876-1968

— —

All items on this page PKG QTY. 1

P107 05 Dec 2017

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com