Spaenaur Catalog 14

Snap-Grip Hose Clamps

Inch and Metric Pouce et Métrique

Colliers de serrage verrouillage à dents

NYLON 6/6 HOSE CLAMPS

CORROSION-RESISTANT

Install by hand in seconds — Strong yet lightweight A non-metallic clamp that will not rust, is non-conducting, not corroded by sea-water, and is stable in a wide variety of chemical salts, bases, alcohols, oils, and grease, gasoline, etc.

Natural Colour (White)

D

Pat. No. 4,128,918

These clamps are applied by a quick ratchet closure, even after the hose is in place. A lateral effort disengages the clamps.

Dia. Range

Clamp Range

Mfr. No.

D

PKG QTY.

SPAENAUR

Inch Min.-Max. ± .01

Metric Min.-Max. ± .25 mm Clamp Width

No.

078-A04-1Y 078-A02-1A

(5.56 mm) (5.56 mm) (6.35 mm) (5.56 mm) (6.35 mm) (6.35 mm) (5.56 mm) (5.56 mm) (5.56 mm) (7.94 mm) (7.94 mm) (7.94 mm)

16 23 26 30 32 38 44 50 56 62 68

.246 - .290 .360 - .406 .410 - .468 .475 - .536 .538 - .608 .597 - .665 .670 - .780 .720 - .825 .870 - .975 .953 - 1.094 1.031 - 1.188 1.250-1.425 1.406 - 1.610 1.594 - 1.813 1.790 - 2.110 1.870 - 2.125 2.120 - 2.390

6.25 - 7.37 9.14 - 10.31 10.41 - 11.89 12.07 - 13.61 13.67 - 15.44 15.16 - 16.89 17.02 - 19.81 18.54 - 21.08 22.10 - 24.77 24.21 - 27.76 26.19 - 30.15 31.75 - 36.20 35.71 - 40.89 40.46 - 46.02 45.47 - 53.59 47.50 - 53.98 53.85 - 60.71

7/32" 7/32"

100 100 100 100 100 100 100 100 100

078-003 078-004 078-005 078-006 078-007 078-009 078-010 078-011 078-013 078-014 078-015 078-016 078-017

1/4"

G

7/32"

1/4" 1/4"

7/32" 7/32" 7/32" 5/16" 5/16" 5/16"

078-A01-1X

50 50 25 25 25 25 10 10

078-A03-1P

250

11/32" (8.73 mm) 11/32" (8.73 mm) 11/32" (8.73 mm) 13/32" (10.32 mm) 13/32" (10.32 mm)

92

104 114 124 134

RAW MATERIAL SPECIFICATIONS

Test

Unit of

Test

Unit of

Property

Method Measure Nylon 6/6

Property

Method Measure Nylon 6/6 D570 24 hrs., % 1.1

Tensile Strength at Yield D638

psi

9,000

Water Absorption Flammability Rating/ Thickness

Elongation at Fail Flexural Modulus

D638 D790

% 200

UL94

in.

V-2/.028

psi

190,000

Izod Impact 3.0 Deflection Temperature D648 66 psi ° F 430 Deflection Temperature D648 264 psi ° F 160 Dielectric Strength D149 Volts/Mil 550 Volume Resistivity D257 ohm/ cm 2 x 10 13 D756 ft.-lb./in.

Hardness

R105

U.L. Yellow Card File UL Continuous

E70062

w/impact w/o impact

75 85

° C

@.058

Use Temperature

CATALOG 14

NYLON 6/6: Nylon resins are resistant to a variety of organic and inorganic substances. They are not affected by aliphatic and aromatic hydrocarbons, including conventual fuel. Nylon resins are also resistant to a wide variety of organic compounds including aldehydes, ketones, mono-hydroxyl alcohols, most esters and most chlorinated aliphatic and aromatic materials. Organic materials which do affect nylon include phenols, formic acid, trichloroacetic acid, fluroalcohols, acetic acid and other organic acids. Salts, such as calcium chloride, calcium bromide and similar materials should be avoided, especially at high concentration and temperature.

NOTE: These Raw Material Specifications shall not be construed as creating an ex press warranty of description. The specifi cations are approximate and intended to serve only as guides and not as the basis of any sale, agreement or contract of any goods sold by SPAENAUR Inc.

G7 19 JAN 2018

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com

Made with FlippingBook flipbook maker