Spaenaur Catalog 14

NEW

INSERTS

European Technical Approval No. ETA-12/0481 Standard for holding strength.

B

B

ADVANTAGES WHEN USING RAMPA INSERTS

WHY USE AN INSERT WITH A FLANGE?

• Quicker insertion due to sharp edged continuous cutting thread • Cylindrical shape - higher pull out resistance • Mild Steel, Brass or Stainless Steel - strong materials - wood will break first

• Flange covers rough edges of the hole, providing cleaner smoother appearance • Provides a stopping point for inserting

For more INSERTS, see page C157

EXAMPLE APPLICATIONS FOR SCREW-IN & KNOCK-IN INSERTS

CATALOG 14

RAMPA Screw-in Insert Type SKD + KT The RAMPA Screw-in Insert type SKD allows a hidden assembling of furniture elements together with RAMPA Mushroomhead Screws with hex drive Type KT. Due to the design of the insert, the components will be flush mounted and allow an extensive work load.

RAMPA Knock-in Insert Type TS + KF

The Knock-in Insert type TS with its knurled shank is driven into the wood. The board is attached from above with a RAMPA Flathead Screw type KF.

B61 20 NOV 2018

RAMPA ® is a registered trademark of HANS BRÜGMANN GmbH & Co., Germany

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com