Spaenaur Catalog 14

Eye Bolts / Eye Nuts Boulons à œil / Écrous à œil

Metric Métrique

Drop Forged Eye Bolts CONFORMING TO DIN 580 C15 Carbon Steel - Heat Treated Plain Finish

Regular (COARSE) Metric Thread

Dia. D

Nom. Dia.

E

C

F

A

H

*

Not to DIN Calculated Pull Capacity

B

*Max. Pull capacity in kg

DATA IN mm

NOMINAL

PKG QTY.

DIAMETER PITCH mm mm

SPAENAUR

for 1 Bolt

total for 2 Bolts

A C D E F H

No.

* *

026-021

M6

1.00 1.00 1.25 1.50 1.75 2.00 2.50 3.00 3.00 3.50 4.00 4.50 5.00 5.50 6.00

70 70

50 50 95

13 3620 20 — — 10 13 3620 20 — — 10 13 3620 20 8 36 10 17 45 25 25 10 45 10 20.5 54 30 30 12 53 10

026-021ZP (Zinc Pltd.) M6

026-001 026-002 026-003 026-004 026-005 026-006 026-007 026-008 026-009 026-010 026-023 026-024

M8

140 230 340 700

M10 M12 M16 M20 M24 M30 M36 M42 M48 M56 M64

170 240 500 830

27 63 35 35 14 62 30 72 40 40 16 71 36 90 50 50 20 90 38 90 50 50 20 90 45 108 65 60 24 109 54 126 75 70 28 128 63 144 85 80 32 147 68 166 100 90 38 168 78 184 110 100 42 187 90 206 120 110 48 208

5 5 5 1 1 1 1 1 1 1

1200 1800 2180 3600 5100 7000 8600

1270 1500 2600 3700 5000 6100 8300

026-022ZP (Zinc Pltd.) M27

*

11500 16000

11000

C

Drop Forged Eye Nuts CONFORMING TO DIN 582 C15 Carbon Steel - Heat Treated Plain Finish

F

Regular (COARSE) Metric Thread

D

B

Nom. Dia.

H

*

Calculated Pull Capacity

E

*Max. Pull Capacity in kg

DATA IN mm

NOMINAL

PKG QTY.

DIAMETER PITCH

for 1 Nut

total for 2 Nuts

SPAENAUR

mm mm

B C D E F H

No.

*

M8 M8 M6

026-028 026-011

1.00 1.25 1.25 1.50 1.75 2.00 2.50 3.00 3.00 3.50 4.00 4.50

70

50 95 95

18 36 20 20 8 8.5 10 36 36 20 20 8 8.5 10 36 36 20 20 8 8.5 10 45 45 25 25 10 10 10 53 54 30 30 12 11 10

140 140 230 340 700

026-011ZP (Zinc Pltd.)

026-012 026-013 026-014 026-015 026-016

M10 M12 M16 M20 M24 M24 M30 M36 M42

170 240 500 830

62 63 35 35 14 13 71 72 40 40 16 16 90 90 50 50 20 20 90 90 50 50 20 20 109 108 60 65 24 25 128 126 70 75 28 30 147 144 80 85 32 35

5 5 5 5 1 1 1

1200 1800 1800 3600 5100 7000

1270 1270 2600 3700 5000

026-016ZP (Zinc Pltd.)

026-017

026-M01-1P

026-019

CATALOG 14

*WARNING: Lifting eye nuts and bolts must always be tightened so that they bear solidly on the surface they contact. Loads at right angles to the plane of the eye are prohibited. When a specified position in relation to an axis, edge or the like is specified for the lifting eye nut/bolt when screwed in/on, shims should be used if necessary in order to rule out unacceptable loading. The loading values specified apply solely to the use of lifting eye bolts/nuts according to the present Standard on workpieces made of steel, cast steel or grey cast iron. When the lifting eye nuts are used on a metric bolt thread of medium tolerance class, the thread length must be no less than 0.8 nom. dia. and the tensile strength of the bolt not in excess of 500 N/mm 2 .

B270

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 25 JAN 2018