Spaenaur Catalog 14

Nylon Metal Core Screws - Slot Drive Vis de nylon à âme métallique – prise fendue

Inch Pouce

The shear strength of heat-treated steel and the dielectric insulation, corrosion resistance and vibration resistance of nylon. These reinforced screws will provide up to 4 times the strength of standard nylon fasteners. Due to the corrosion resistant nature of the nylon, the Metal Core Screws can, in certain applica tions, replace expensive Stainless Steel, Brass and Monel fasteners at a substantial cost savings. Metal-Core Screws are recommended in applications requiring electrical, thermal and vibration insulation in shear or double shear connections. The reinforcing core incorporates a recessed metal head that permits tightening with high speed, high torque automatic drives.

B

B

NYLON SHELL Nylon 6/6 Natural High dielectric resistance Corrosion resistant Vibration, abrasion resistant

ROUND HEAD

FILLISTER HEAD

Thead Size 6-32 8-32 10-32 1/4-20 Head diameter .255 .300 .350 .460 Head height .095 .120 .130 .170

Thread Size 6-32 8-32 10-32 1/4-20 Head diameter .215 .260 .300 .400 Head height .100 .140 .160 .220

REINFORCING CORE High strength, high carbon C.H.Q. steel. Precision cold formed and knurled. Electro zinc or cadmium plated. Order by SPAENAUR No’s. listed below.

ROUND WASHER HEAD

Thread Size 6-32 8-32 10-32 1/4-20 Head diameter .230 .265 .315 .460 Head height .100 .110 .130 .175 Washer thick. .025 .032 .036 .056 Washer dia. .300 .370 .425 .550

82 ° FLAT HEAD

Thread Size 6-32 8-32 10-32 1/4-20 Head diameter .265 .305 .365 .480 Head height .085 .100 .120 .155

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 PKG QTY.

ROUND HEAD ROUND WASHER HD. FILLISTER HEAD FLAT HEAD

DIAMETER LENGTH

445-300

445-320 445-321 445-322

445-340 445-341 445-342 445-343 445-345 445-346 445-347 445-349 445-350 445-351 445-353 445-354 445-355 445-356 445-357 —

445-360 445-361 445-362 445-363 445-365 445-366 445-367 445-369 445-370 445-371 445-373 445-374 445-375 445-376 445-377 —

1/4" 3/8" 1/2" 5/8" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/8" 1/2" 5/8" 3/4" 1"

445-B05-1T

6-32 UNC

445-302

—

—

445-305 445-306

445-325 445-326

8-32 UNC

—

—

445-309 445-310 445-311 445-312 445-313 445-314 445-315 445-316 445-317 445-319

445-329 445-330

10-32 UNF

— —

445-333 445-334 445-335 445-336 445-337

1/4"-20 UNC

1"

50 50

—

—

—

1-1/2"

CATALOG 14

MAX TORQUE

Tensile Test

Double Shear

SIZE

BEFORE

ULTIMATE YIELD BREAK YIELD BREAK

DEFORMATION TORQUE LBS.

LBS.

LBS.

LBS.

6-32 8-32

1 In. Lbs. 3 In. Lbs. 5 In. Lbs.

1.5 In. Lbs. 4 In. Lbs. 6 In. Lbs. 13 In. Lbs.

24 66

32 200 240 72 300 360

10-32

96 104 600 640 120 174 1400 1600

1/4-20 12 In. Lbs.

B25

18 JAN 2018 F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. P: 1-800-265-8772 F: 1-888-252-6380 www. .com