Spaenaur Catalog 14 - Digital Flipping Catalog

Linked Chain / Load Binders / Cutters Chaînes à maillons / Tendeurs à chaîne / Couteaux

Inch Pouce

Grade 30 Chain Low Carbon Steel

Approximate Weight (lbs.)

WLL PKG

Spaenaur

Trade Size

QTY. 750' 1000'

Per Foot

No.

(lbs.)

Design Factor 4:1

121-720 121-721 121-722

0.30 0.19 0.52

1/8"

400 800

3/16"

1/4"

1,300

350'

Grade 70 Transport Chain

Boron Manganese Heat Treated Steel

Minimum

WLL PKG

Weight (lbs.)

Spaenaur

Never exceed working load limit of chain!

Trade Size

QTY.

Per Foot

No.

(lbs.) 4,700 6,600

121-723 121-724

5/16"

275' 200'

0.93 1.42

3/8"

Grade 30 & Grade 70 Chains Must Not Be Used For Overhead.

Standard Lever Load Binder • Forged Steel - quench and tempered. • Ball and socket swivel joints at hook assemblies permit a straight line pull. • Do not operate load binder while you or anyone else is standing on the load. • Tighten handle in a downward manner. • Do not use handle extension for tightening. • Secure position of binder by wrapping the loose end of chain around the handle and tighten chain. • Always stay “clear” of the handle as it could snap back. • Do not close your hand around the handle. • Inspect binder prior to use and discard in case of signs of wear.

Weight

Dimensions (Inches)

hcaE niahC

SBN LLWekaT

Spaenaur

No. (lbs.) (lbs.) 121-C37-1X 5/16 - 3/8" 7.00 24.13 22.13 17.88 16.00 10.38 10.38 0.05 4.25 5,400 19,000 *121-743 5/16 - 3/8" 7.00 24.13 22.13 17.88 16.00 10.38 10.38 0.05 4.25 5,400 19,000 Warning: Never exceed working load limit! Failure to follow instructions can result in serious injury! *Recoilless type Chain & Bolt Cutter Size (lbs.) A B C D E F G Up

M

Cutting Capacity: 1/2" for Grade 30 Chain 3/8" for Grade 70 Chain Length: 42" Weight: 18-20 lbs.

Blade Material: Alloy Steel, Satin Finish.

Adjustable Blade Clearance. Suitable For Mild Steels Only!

Spaenaur No. 876-3000

CATALOG 14

These tools are sharp and should be used with caution! Using them beyond the stated capacity or on other products will damage the blades and the tool!

See following page for chain accessories

M58

P : 1-800-265-8772 F : 1-888-252-6380 www. .com F : 1- 8-252-6380 service@spaenaur © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. 19 JAN 2018