Spaenaur Catalog 14 - Digital Flipping Catalog

Adjustable / Flexible T-Handle Draw Latches Loquets à levier à poignée en T réglables / flexibles Adjustable Non-corrosive Draw Latch

Metric Métrique

25.4 (1.00) Minimum wall clearance to allow proper latching and unlatching.

To adjust, simply thread the stainless steel nut up or down the clevis to the desired position then

37 (1.46)

KEEPER

18 (.71)

press the cover of the draw latch and complete the latching action. When secured, the latch conceals all of its working parts. Material and Finish BASE, CLEVIS, PIVOT NUT and KEEPER: Glass reinforced nylon, black. COVER and RETAINER: Acetal, black. ADJUSTMENT NUT: Stainless steel, passivated

2.5 (.100)

COVER

(TYP.)

95 (3.74)

BASE

ADJUSTING NUT CLEVIS

17 (.67)

Panel Preparation

SPAENAUR No. 097-429 Mfr. #E8-10-502-20

9.5± 0.1 (.375±.005)

+0.1 -0.0 +.003 -.000

5.2 (.205

Ø

Joining edges of closure

)

5 places

6.4 (.25)

MIN.

PKG QTY. 1

20.6± 4 (.81± .16)

6.4 (.25)

MIN.

Product Strength Guidelines Maximum working load: 1560 N (350 lbs.) Average ultimate load: 2220 N (500 lbs.)

23.8± 0.2 (.937± .010)

To adjust latching force thread adjustment nut up or down clevis (total 7.9 mm or .31" range).

Flammability Rating: UL94-HB Operating Temperature Range: -29 ° C to 80 ° C (-20 ° F to 176 ° F)

19± 0.1 (.750± .005)

Flexible T-handle Draw Latch • Non-corrosive/non-conductive materials • Absorbs and reduces vibration • Compensates for misalignment in 3 planes

SPAENAUR No. 097-400 Mfr. #F7-53

L

PKG QTY. 1

Installation Front Mount uses three M5 or No. 10 screws or Ø3/16" rivets. (not included)

Material and Finish HANDLE: Thermoplastic elastomer, black. KEEPER and BRACKET: Glass reinforced nylon, black.

46 (1.81)

25.4 (1.00)

15.2 (.60)

Steady state clamp force vs. mounting dimension ( 21 ° C /70 ° F)

Ø10.2 (.40) counterbore

67 N Lbs. 15

122 (4.81)

(REF. when latched to recommended mounting dimension)

millimeter (inch) Dimensions without tolerances are for reference only.

44

10

KEEPER

BRACKET

HANDLE

31 (1.23)

22

5

21 (.82)

CATALOG 14

20.3 (.80)

18 (.71)

Mounting Dim.

Recommended

0

0

+3.2 (.13) -3.2 (.13) Variation from recommended mounting dimension (Distance between bracket and keeper mounting holes). 0

-0.0 (.205+.003 -.000 )

Ø 5.2+0.1

(4 Places)

41 (1.60)

9.5±0.2 (.375±.010)

Flammability Rating: UL94-HB

5.1 (.20)

19± 0.2 (.750±.010)

L122

P : 1-800-265-8772 F : 1-888-252-6380 www. .com F : 1- 8-252-6380 service@spaenaur © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. 19 Jan 2018