Spaenaur Catalog 14 - Digital Flipping Catalog

Lift and Turn ® Latches Loquets Lift and Turn ®

Metric Métrique

Flush Design • Meets NEMA 4 and IP-66 applications with optional sealing gasket • Locking & non-locking have same panel preparation • Smooth, easy operation

GRIP RANGE (SEE TABLE)

PAWL REVERSED

PAWL FORWARD

MAX OUTER PANEL THICKNESS = 6 (.25)

LEVER

60 (2.4)

CUP SEALING GASKET (OPTIONAL) Order Separately SPAENAUR No. 097-451 Mfr. #62-973-431

HOUSING

34 (1.34)

JAM NUT

SHAFT M8 Thread

MATERIAL Housing and Lever: Die-cast Zinc Product Strength Guidelines Maximum working load: 440 N (100 lbs.)

3 (.12) PULL-UP

PAWL RETAINING CLIP

TOOL-SECURED (No. 2 PHILLIPS)

LOCKWASHER

DO NOT ALTER THIS FACTORY PRE-SET NUT.

SCREW/LOCKWASHER ASSEMBLY M5 Thread–Panels thicker than 6 (.25) require a longer screw/ lockwasher combination (not supplied).

85 (3.35)

millimeter (inch)

FLARED MOUNTING BRACKET

Dimensions without tolerances are for reference only.

KEY-LOCKING

4 (.16)

40 (1.58)

56 (2.20)

GRIP RANGE

SPAENAUR NUMBERS

Basic Latch

Key-Locking Latch

Pawl Black Forward Reversed Textured Polyester Textured Polyester Min. - Max. Min. - Max. Chrome Powder Chrome Powder Pawl Black

097-075 097-076 097-077 097-078 Mfr. #62-40-101-2 Mfr. #62-40-151-2 Mfr. #62-42-101-2 Mfr. #62-42-151-2

L

6 - 16 (.23 - .63)

56 - 66 (2.20 - 2.59)

INSTALLATION 1. Prepare a rectangular opening as shown.

2.

3.

FRAME FOR TOP LATCHING FRAME FOR SIDE LATCHING

8 (.34 ± .06) +2 -1

DOOR OR PANEL

14.5 (.57 ± .01) +1 -0

4. Pawl should be adjusted to GRIP measurement with the door open and the lever in the LATCHED position. Use two 13 mm wrenches to tighten.

CATALOG 14

73 ± 0.5 (2.88 ± .01)

R3 (.13) MAX. (RECOMMENDED for most effective sealing.)

Sealing Note NEMA 4 / IP-66 sealing is achieved by using the environmental CUP SEALINGGASKET and sealing the mounting screw threads with a suitable material such as an anaerobic sealant.

30 ± 0.5 (1.19 ± .01)

8 +2 -1

(.34 ± .06)

All items on this page PKG QTY. 1

L105

P : 1-800-265-8772 F : 1-888-252-6380 www. .com F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. 19 jan 2018