Spaenaur Catalog 14 - Digital Flipping Catalog

Vise Action ® Compression Latches / Pull Tabs Loquets à mécanisme de compression / tirettes Vise Action MD

Metric Métrique

Single-hole Mount Large size

GRIP measured in locked position

19 (.75)

Straight Pawl Offset Pawl Reversed

18 (.70) MAX. 4 (.16) MIN. door thickness

Grip Range for 097-056 and 097-057 11.4 (.45) Min. 27.2 (1.07) Max. • Internally gasketed • Most robust design

75 °

FRAME

DOOR

33 (1.31)

Deep Offset Pawl Reversed

GASKET

LOCKWASHERS (2)

M10 JAM NUTS (2)

29 Ø (1.13)

Other Grip Ranges to 75 (3.0) on special order.

PAWL (Open Position)

M22X1.5 MOUNTING NUT LATCH ASSEMBLY PAWL

BUSHING

097-056 Mfr. #E3-19-15 Slotted Recess Style

SLOTTED RECESS 2. (.07) wide x 7.5 (.30) deep, x 8.7 (.34) long

6.4 (.25) PULL-UP

MOUNTING LOCKWASHER

6.4 (.25)

64 (2.52)

39 (1.54)

097-053 Mfr. #E3-5-15 Key sold separately.

097-057 Mfr. #E3-15-15 Tubular Key Style

Housing: Die-cast zinc Finish: Black Matte powder coated Cam: 1075 Case hardened steel

50 (1.97)

Ø11.5 (.455)

Compressive Strength: Maximum working load 450 N (100 lbs.)

INSTALLATION

2. & 3. Diagrams are same as for single- hole mount small size. (See previous page.)

4. To adjust grip: Measure your grip. Open door. Position pawl on shaft to your grip meas- urement (with pawl in latched position). Tighten jam nuts hard against lockwashers and pawl using two wrenches.

1.

For gasketed doors:

FRAME

GRIP (Measuredwith gasket compressed)

GASKET

FRAME

22.5 +,02 -0,0 +.000 -.010 (.885 )

Ø

24 ± 1,5

(.938 ± .062 )

millimeter (inch) Dimensions without tolerances are for reference only.

DOOR

OPTIONAL : Round hole installation with spur washer

PAWL

DOOR

+,02 -0,0

19.1

+.010 -.000 (.750 )

L

T-Handle Style (with or without Keylock.)

Grip measured in locked position

INSTALLATION 1.Insert latch and tighten mounting nut. 2. With latch in closed position, adjust jam nuts to position pawl at correct grip. Installation dimensions same for large size single-hole mount (shown above).

Deep offset pawl reversed

Offset pawl reversed

18 (.70) MAX. 4 (.16) MIN. door thickness

Straight pawl

FRAME

75 °

DOOR

A

Pawl in open position

29 (1.13)

22 (.88)

GASKET

Ø

M22 x 1.5 MOUNTINGNUT

M10 JAM NUTS (2) LOCKWASHERS (2)

Housing : Die-cast zinc Black Matte powder coated Cam and Sleeve: 1075 Case hardened steel

SPAENAUR No.

097-054 non-locking Mfr. #E3-11-15 097-055 locking (keys included) Mfr. #E3-18-15 097-097 locking (keys included) Mfr. #E3-18-35

LATCH ASSEMBLY PAWL

MOUNTING LOCKWASHER

32 (1.26)

32.5 (1.27)

64 (2.52)

82.5 (3.25)

6.4 (.25) Pull-up

Grip Range 097-054 & 097-055, 11.4 to 27.2 (.45 to 1.07) 097-097, 38.9 to 54.6 (1.53 to 2.15)

CATALOG 14

097-436 Mfr. #E3-27-1

When using pull tab, add 2 (.084) to your desired grip range.

Pull Tab (finger-grip tab)

Helps in lifting or pulling doors and panels when tool or key operated latches are used. Fits SPAENAUR No's. 097-056 and 097-057.

Pawl in latched position

Edge of door

Black Nylon

All items on this page PKG QTY. 1

L103

P : 1-800-265-8772 F : 1-888-252-6380 www. .com F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. 19 Jan 2018