Spaenaur Catalog 14 - Digital Flipping Catalog

Inserts

Inch and Metric Pouce et Métrique

Inserts

A-W SERIES ® INSERT PROFILE

The A-W Series Insert can be installed into most any material softer than itself that is thicker than .062/ 1.57 . The A-W Series provides exceptional shear strength and pull out in fiberglass and plywoods. The brass A-W Series Insert is particularly useful for the fiberglass boat industry. The A-W Series Insert is installed using lightweight, handheld pneumatic tools that can be located at any position in your product’s assembly sequence. The A-W Series Insert can be installed either prior to or after finish.

C

UNIFIED (INCH) AND METRIC THREAD

HD

IL

HOLE DEPTH

L

D

MATERIAL THICKNESS .062/ 1.57 MIN.

BLIND HOLE

STEEL TIN ZINC TRIVALENT

15/64 (.234) 17/64 (.266) 19/64 (.297) 19/64 (.297) 25/64 (.391) 17/32 (.531) 19/32 (.594) HOLE SIZE +.005 / .000

SPAENAUR No.

MANUFACTURER No.

THREAD SIZE 6-32 UNC 8-32 UNC

THREAD CALL OUT

HD ±.005

L ±.015

D MAX. .233 .264 .295 .295 .389 .528 .590 D MAX. 6.71 7.50 9.88 14.99

IL MAX. .205 .205 .205 .205 .275 .325 .390 IL MAX. 5.21 5.21 6.99 9.91

HOLE DEPTH MIN.

PKG QTY.

215-A30-2T 215-A24-2P 215-A79-1K 215-A15-1N 215-A19-1M 215-A28-1T 215-A12-2P

AWS9T-632 AWS9T-832 AWS9T-1024 AWS9T-1032 AWS9T-420 AWS9T-518 AWS9T-616

100 100 100 100 100 100 100

632 832

.255 .285 .320 .320 .415 .550 .615

.370 .370 .370 .370 .515 .615 .740

.400 .400 .400 .400 .540 .640 .770

10-24 UNC 10-32 UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC

1024 1032

420 518 616

HOLE SIZE +0.13 / 0.00

SPAENAUR No.

MANUFACTURER No.

THREAD SIZE

THREAD CALL OUT

HD ±0.13

L ±0.38

HOLE DEPTH MIN.

PKG QTY.

216-K33-1W 216-K20-2K 216-K12-2A 216-K38-1Y

AWS9T-470 AWS9T-580 AWS9T-610 AWS9T-8125

M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M10 x 1.5 ISO

100 100 100 100

470 580 610 1015

6.75 7.54 9.92 15.00

7.24 8.13

9.40 9.40

10.16 10.16 13.72 19.56

10.54 15.62

13.08 18.80

THREAD CLASS: The A-W Series Insert’s internal threads are manufactured oversized to compensate for resulting thread portion shrinkage during the installation swaging process. They are not gaugeable prior to or after installation but will be compatible with Class 2A/3A or 6g screws after installation. NOTE 1: Additional UNF threads are available. Contact Spaenaur Sales Desk for details. NOTE 2: HOLE SIZE: The A-W Series Insert hole size will be dependent on parent material density. Experimentation is required for optimum performance. NOTE 3: FINISH: The standard specified finish for the A-W Series Insert is tin. Alteration to this finish will reduce performance. NOTE 4: Additional finishes are available – Zinc Trivalent & Yellow Zinc Trivalent.

CATALOG 14

All materials for the A-W Series when plated look similar. Radial grooves are machined into the part for material identification. MATERIAL TYPE IDENTIFICATION GROOVES

NONE

STEEL BRASS

For air tool selection see pages C144-C146

2

C137

AVK ® is a registered trademark of AVIBANK MFG., INC.

P : 1-800-265-8772 F : 1-888-252-6380 www. .com F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.

18 Jan 2018