Spaenaur Catalog 14 - Digital Flipping Catalog

Eye Bolts

Inch Pouce

Boulons à œil

FORGED / 1030 STEEL / HEAT TREATED Self-Coloured

SHOULDER TYPE

EYE BOLTS

(D)

(F)

(In Inches)

(A)

(B)

(C) Eye I.D.

Nom (E)

Centre

SPAENAUR Thread Shank

Eye O.D.

Overall

Of Eye To PKG

Size Length

Length Shoulder QTY.

No.

D

EYB-3 EYB-4 EYB-5

1/4-20 1.00

0.50

0.94 2.20

0.70

10

B

1/4-20 1.00-1.06 0.69-0.81 1.19 2.22-2.53 0.69-0.81 10 10 024-T38-1X 5/16-18 1.12-1.19 0.81-0.94 1.44 2.66-2.97 0.88-1.00 10 EYB-7 3/8-16 0.75 1.00 1.69 2.81 1.20 10 EYB-8 3/8-16 1.25 0.75 1.44 2.97 1.00 10 EYB-9 3/8-16 1.25-1.38 0.94-1.06 1.69 3.09-3.47 1.06-1.19 10 EYB-10 7/16-14 1.38-1.50 1.00-1.12 1.81 3.41-3.78 1.19-1.31 10 EYB-11 1/2-13 1.50 1.00 1.94 3.75 1.28 5 EYB-12 1/2-13 1.50-1.62 1.12-1.25 2.12 3.81-4.19 1.31-1.44 5 EYB-13 9/16-12 1.75-1.88 1.31-1.44 2.56 4.56-4.94 1.59-1.72 5 EYB-14 5/8-11 1.75-1.88 1.31-1.44 2.56 4.56-4.94 1.59-1.72 5 EYB-15 3/4-10 2.00-2.12 1.44-1.56 2.81 5.06-5.50 1.72-1.91 5 EYB-16 7/8-9 2.25-2.38 1.56-1.69 3.19 5.75-6.19 2.03-2.22 1 EYB-17 1-8 2.50-2.62 1.69-1.81 3.56 6.44-6.88 2.22-2.41 1 EYB-18 1-1/8-7 2.75-2.88 1.94-2.06 4.06 7.31-7.75 2.59-2.78 1 EYB-19 1-1/4-7 3.00-3.12 2.12-2.25 4.44 8.00-8.44 2.84-3.03 1 EYB-20 1-1/2-6 3.50-3.62 2.44-2.56 5.19 9.22-9.72 3.19-3.44 1 EYB-40 1-3/4-5 3.75-3.88 2.75-3.00 6.00 10.50-11.12 3.88-4.12 1 5/16-18 1.125 .625 1.19 2.50 0.875

C

F

E

B

A

ASME B18.15

SHANKS FULL THREADED TO WITHIN 1/8" - 3/8" OF SHOULDER. Class 2A (UNC-2A) (COARSE THREAD) WARNING: APPLIES TO EYE BOLTS & EYE NUTS Safe working load is drastically reduced when loading at an angle. Loading must never be made at an angle greater than 45° from bolt or nut centreline.

-Special Stock Sizes -

024-044 1/4-20 024-022 1/2-13

2.00 6.00

0.50 1.00

0.94

3.19 8.00

0.75 1.25

10

▲

1.938

5

No. 024-044 Hot Galvanized Finish. 1" Thread Length. • Hot Galvanized Finish. 2" Thread Length. ▲

Self-coloured finish except:

Plain Pattern (Straight Shank) Eyebolt Showing Rated Capacity in lbs. at 0° (for ref. only)

Shoulder Pattern Eyebolt Showing Rated Capacity in lbs. at 0° and 45° (for ref. only) Nominal Size 0 degrees 45 degrees 1/4 400 NR 5/16 680 NR 3/8 1,000 220 7/16 1,380 330 1/2 1,840 520 9/16 2,370 700 5/8 2,940 890 3/4 4,340 1,310 7/8 6,000 1,910 1 7,880 2,630 1-1/8 9,920 3,840 Rated Capacity in lbs.

Rated Cap. in lbs.

Nominal

Size 0 degrees 1/4 400 5/16 680 3/8 1,000 7/16 1,380 1/2 1,840 9/16 2,370 5/8 2,940 3/4 4,340 7/8 6,000 1 7,880 1-1/8 9,920 1-1/4 12,600 1-1/2 18,260 1-3/4 24,700 2 32,500 2-1/2 52,000

Plane of the Eye

CATALOG 14

1-1/4 12,600 4,125 1-1/2 18,260 6,040 1-3/4 24,700 8,250 2 32,500 10,910

NR - no rating

P : 1-800-265-8772 F : 1-888-252-6380 www. .com F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. Note: All Eye Bolts and Eye Nuts, whether in blanks or fully machined, as shown on page B269, are covered by our standard warranty. The warranty becomes VOID whenever modifications are made or further machining is done by the buyer, also in cases where these items are subject to an angular lift or pull. B267 25 JAN 2018