Section M

Standardized Brass Eyelets & Fastener Tools Œillets en laiton standardisés et outils de fixation

Inch Pouce

Eyelet Diameter

Rolled Flange Head Eyelets Adaptable as rivets, reinforcements, pivots, bushings, vents, etc. Widely used in electronics parts assemblies. Brass

Barrel Length

Flange Diameter

Eyelet Diameter

Flange Diameter

Material Thickness

Barrel Length 2/32" 3/32" 4/32" 5/32" 6/32" 7/32" 3/32" 4/32" 5/32" 6/32" 7/32" 3/32" 4/32" 5/32" 6/32" 7/32" 8/32" 9/32" 3/32" 4/32" 5/32" 6/32" 7/32" 8/32" 9/32" 10/32" 11/32" 12/32" 10/32" 11/32"

Spaenaur No.

Eyelet Diameter

Flange Diameter

Material Thickness

Barrel Length

Spaenaur No.

E-22 E-23 E-24 E-25 E-26 E-27 E-33 E-34 E-35 E-36 E-37 E-43 E-44 E-45 E-46 E-47 E-48 E-49 E-53 E-54 E-55 E-56 E-57 E-58 E-59 E-410 E-411 E-412 E-510 E-511

E-63 E-64 E-65 E-66 E-67 E-68 E-69

3/32" 4/32" 5/32" 6/32" 7/32" 8/32" 9/32"

0.059"

0.105"

0.007"

0.183"

0.290"

0.0105"

E-610 E-611 E-612 E-613

10/32" 11/32" 12/32" 13/32"

0.089"

0.150"

0.009"

E-73 E-74 E-75 E-76 E-77 E-78

3/32" 4/32" 5/32" 6/32" 7/32" 8/32"

0.121"

0.200"

0.0095"

0.215"

0.340"

0.011"

9/32" 104-C03-1K

E-710 E-711 E-712

10/32" 11/32" 12/32"

E-83 E-84 E-85 E-86 E-87 E-88 E-89

3/32" 4/32" 5/32" 6/32" 7/32" 8/32" 9/32"

0.152"

0.245"

0.010"

0.246"

0.385"

0.011"

E-810 E-811 E-812 E-813

10/32" 11/32" 12/32" 13/32"

M

Table Continues

EYELET TOLERANCES: Length Under Flange ± .002" Eyelet Diameter ± .005" Flange Diameter ± .005"

PKG QTY. 100 Coil/Grip Ranges: No two applications being alike, it’s impossible to offer specific standards as to how much barrel length there should be to obtain proper coil/grip. Too much length can result in barrel buckling (collapsing). Too little may mean loss of grip strength. Rigid materials usually need less; soft flexible materials will need more, as a wide coil (to grip more material) is desirable. If parts fastened are exposed to unusual stresses, extra length is usually desirable, even though materials may be rigid in nature. As a general guide in preliminary selection, the following should be helpful: Eyelet Diameter: 3/64” to 1/16” 3/32” to 1/8” 5/32” to 3/16” 5/32” to 3/16” 1/4” or more Additional Length: 1/32” 1/16” 3/32” 3/32” 1/8”

Eyelets See page M30 for additional styles. Special Size PKG QTY. 100

CATALOG 14 CATALOG 14.04 2019/08/08

Barrel Eyelet Diameter Length

Flange Dia.

SPAENAUR No.

Material

Finish

Remarks

GE-28

Brass Plain 11/64" 7/8"

3/8" Flat Flange -

104-C02-1T Aluminum Plain 9/32" 3/16" 1/2"

M32 01 AUG 2019

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com