Section L

Adjustable Grip Latches Loquets à prise ajustable

Metric Métrique

Arrowhead (Pawl Indicator) Design • Detents in full open and closed positions • Turn clockwise or counter-clockwise to operate

Series 400

Height of knob (from outside surface of panel) is adjustable within limits shown by adjusting ferrule on threaded sleeve before installing latch. MAX. OUTER PANEL THICKNESS and GRIP RANGE — (see table).

Material and Finish

KNOB: Nylon, black. SHAFT: Low carbon steel, Dacrosealed PAWL: 1010 Steel, Dacrotizes ♦ FERRULE: 6061 Aluminum, natural. SLEEVE: Die cast zinc with chemical protective film. MOUNTING NUT: Steel, zinc plated plus yellow chromate dip. JAM NUTS: Steel, zinc plated plus yellow chromate dip. SPRING: 302 Stainless steel, natural. PIN: 303 ♦

ADJUSTABLE

Stainless steel, passivated. LOCKWASHERS: Spring steel Dacrotized

PKG QTY. 1

♦

♦

Registered tradename of Metal Coatings International, Inc.

Installation

Max.

Outer Panel

Grip Range

H W X

± 0.13 -0.00 (+.005 -0.00)

SPAENAUR No.

Dimensions

Knob

Pawl as shown Pawl reversed

± 0.13 ( ± 0.05)

øD L P Height

Thickness

Min.

Max.

Min.

Max.

Min.

Max.

Mfr. No.

L

L

19.1 47.6 15.9 17.5 (.69) Max. 1.59 (.063) 3.2 (.13) 15.9 (.63) 15.9 (.63) 28.6 (1.13) 11.51 9.78 12.30 13.10

097-094 69-10-401-11

(0.75) (1.88) (.63) 12.7 (.50) Min.

6.35 (.250) 7.9 (.31) 20.6 (.81) 20.6 (.81) 33.3 (1.31) (.453) (.385) (.484) (.516)

Installation Latch operates through 90 ° rotation in direction shown with a positive click stop at both extremes. Pawl pulls up at both extremes. 1. Adjust ferrule to desired knob height (see table). 2. Remove shaft nuts, lockwashers, pawl and mounting nut (if assembled). 3. Insert shaft through hole in panel to engage flats of sleeve with shaped hole. 4. Check arrow orientation. 5. Apply and tighten mounting nut. 6. Install pawl and shaft nuts as shown, position pawl for desired grip and use two wrenches to tighten nuts firmly against pawl. millimeter (inch) Dimensions without tolerances are for reference only.

Panel Preparation

CATALOG 14

Type “A”

Type B

Turn clockwise to latch

Turn counter clockwise to latch

L97

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 22 JAN 2018