Section L

Block Hinges

Inch and Metric Pouce et Métrique

Paumelles

DIECAST ‘BLOCK’ HINGES

Dimensions - Block Hinges (one portion only is shown)

G

Two drilled and tapped holes per section require me tr ic bolts to attach. M6 x 1 mm pitch for medium hinges and M8 x 1.25 mm for large hinges.

D

C

B

E F

SPAENAUR No.

Medium

Large

Finish Raw Black Chrome

098-203 098-180 098-204 098-181

H

A

098-205

These neat ‘block’ hinges are ideal for metal cabinets, instrument panels, etc. They are not handed, and the upper part simply lifts onto a fixed, zinc plated steel pin. They are normally exterior-mounted, and rotation is completely free through 360 chromium plated or raw metal suitable for painting as part of an overall installation scheme.

Dimensions

Medium Large

A. Length (1/2 total)

1.50" 0.62" 0.75" 0.44" 0.75" 0.35"

2.00" 0.75" 1.12" 0.75" 1.00" 0.50"

B. Width C. Height

D. Height to pin E. Location F. Location G. Hole Dia. Hole depth

6 mm 8 mm

1 Hinge - 2 Pieces PKG QTY. 1

0.3"

0.5"

‘BLOCK’ HINGES in Stainless Steel Here is a simple concept which can solve a lot of trouble for cabinet-builders and sheet metalworkers! Available in two standard sizes, the stainless steel versions will completely overcome problems of corrosion, staining and binding-up which can occur in damp or chemically-active environments.

Features: • Attractive satin finish with chamfered edges. • Block and pin is Grade 303 Stainless. • Two standard sizes from stock. • Ready-lubricated for smooth action. Two drilled and tapped holes per section require metric bolts to attach. M5 x 0.80 mm pitch for small hinges and M6 x 1.00 mm pitch for medium hinges.

L

L

SPAENAUR No. 098-821 Small Block Hinge 098-822 Medium Block Hinge

G

E

F

H

D

C

1 Hinge - 2 Pieces

PKG QTY. 1

A

B

45 ° CHAMFER ON ALL EDGES

Mounting and operation of ‘Block’ hinges on externally-mounted doors.

Dimensions

Smal l

Medium 1.496" 0.512" 0.748" 0.433" 0.748" 0.354"

CATALOG 14 CATALOG 14.06

A. Length (1/2 total) 1.260"

B. Width C. Height

0.512" 0.629" 0.374" 0.629" 0.315" 0.295" 0.236"

D. Height to pin E. Location F. Location G. Hole Dia. Hole depth H. Pin size

Our ‘block’ hinges represent a convenient and attractive way of mounting externally-fitted doors. They are tapped to accept metric screws or studs, M5 x 0.80 (small) and M6 x 1.00 (medium). (Special volume orders can be supplied in chemically-blacked or bright polished finish).

5 mm 6 mm

0.295" 0.236"

Nylon Lift-off Hinges on page L87.

L83

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 11 FEB 2020