Section L

Strap Hinges / Flat Shims

Inch Pouce

The hinges shown here are all 8" stamped steel hinges designed for flush mounting over door seals. All are equipped with hardened steel truss bearings to effectively carry the door loads . . .180 ° door movement. Pentures�/ cales plates

Steel

Door Hinge Zinc Plated

Has 7/16" clearance over the seal. 5 mounting holes, 11/32" dia. Weight: 2 lbs., 3 oz. each. Specifications: #7 gauge hot rolled steel. Dimensions: 8" centre of pin to end of strap. 3-1/16" centre of pin to end of butt plate. 4-1/2" butt plate width. 2" strap width. When ordering specify Right-Hand or Left-Hand.

PKG QTY. 1

Right-Hand Description

Mfr. #

SPAENAUR No.

099-050

5889

OVER THE SEAL HINGES — FLUSH 8 gauge Stamped Steel Finish: Zinc Plated

Length of Strap SPAENAUR No. 099-056 099-058 12" 16"

PKG QTY. 1 Mounting holes for 5/16" bolts

Dimensions & Style:

Same as 099-050 above, but with longer strap. — 1/2" diameter steel pin will fit right or left.

STEEL STRAP HINGES Plain and Zinc Plated Heavy Strap with Riveted Steel Pin

Length Each Leaf 4"

Total Screw Holes 6

Countersunk for Screw Size #9

Spaenaur No. 098-104

Width of Joint 1-1/2"

Gauge of Metal .083"

L

L

Three Knuckle Pattern with RIVETED PIN STEEL or BRASS

Countersunk for Screw Attachment (Screws not included)

See Pages B64 to B69 for Screws

PKG QTY. 1

STEEL SAFETY HASPS - SWIVEL STAPLE Zinc Plated with RIVETED PIN

for Ctsk. Screw Size

Size Length Closed

Hinge Part Length

Total Screw Holes

Spaenaur No.

Joint Length

Hasp Gauge Staple Plate Size

Staple Gauge

098-223

3-1/2" 1-3/8" 1-1/2" 0.074 1-23/32" x 1-11/32" 0.074 #7

7

CATALOG 14 CATALOG 14.06

Items may not be as illustrated. Screws included

098-G09-1X 4-1/2"

2"

1-1/2" 0.090 1-23/32" x 1-11/32" 0.074 #7

7

PKG QTY. 1

All Dimensions are Approximate

Steel 1/8" SHIM Zinc Plated

099-069 SPAENAUR No. Use for all 099-050 to 099-058 hinges when 1/8" offset is required.

PKG QTY. 1

L77 18 FEB 2020

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com