Section L

Door Hold-Backs / Gate Locks Retenues de porte / serrures de barrière

Inch Pouce

099-B10-1Y (Mfr. #666) A simple positive door holder with good shock absorbing qualities, giving near silent operation. The rubber female portion (acting as a door buffer) has a unique internal design, which provides a positive grip on the male portion. The male portion is molded from black polypropylene. The complete unit gives positive corrosion-free performance. Furnished black. 099-B11-1C (Mfr. #777) For production line assembly, the base of the female portion has been drilled with a 6 mm tapped hole. Both 099-B10-1Y and 099-B11-1C have a 44 lb. pull-off. Colour- black. 099-B12-1N (Mfr. #776) with plain washer. 099-B13-1T (Mfr. #778) with tapped washer. Designed for a softer, more gentle door holder of this type, a pattern with a 6-1/2 lb. pull-off has been designed under part numbers 099-B12-1N (with plainwasher) and 099-B13-1T (with 6 mm tapped washer.) Male part colour- black. Female part colour- blue.

SILENT DOOR HOLDER

For years the most completely dependable method of retaining light and heavy doors or hinged panels in an open position – securely, soundlessly and without the risk of finish-marring damage. No metal-to-metal contacts. Plunger is surrounded by snug-fitting Neoprene Cup in socket.

Socket

Rubber Door Holder

Plunger

1.30 ± 0.06

1.57

Zinc Plated

SPAENAUR

Plunger Length

Overall Length

.25

No.

Smaller hole has more holding power.

M-70 M-74 M-75 M-76 M-73

1-1/4" Plunger 1-3/4" Plunger 2-1/4" Plunger 2-3/4" Plunger

1-5/8" 2-1/8" 2-5/8" 3-1/8"

Female Part

1.00

1.16

PKG QTY. 1

Socket (Large Hole)

.25

Male Part

DOOR HOLDER - For Holding Door Against Side of Body

PKG QTY. 1

(Two part)

099-B03-1W SPAENAUR No.

was specially designed for use on all types of enclosures using hinged or sliding doors. The unique design includes a brass (nickel plated) screw which allows delicate adjustment for the force required to hold even the heaviest door or panel. Adjustable ● Nylon ● Door Holder SPAENAUR No. 099-214

Finish - Galvanized

Stainless Steel Plunger Spring

Equipped With Grease Fitting

(Mfr. # 555)

(Mfr. #5602- ZUA- 13)

2.25 1.63

1.00

.31

1-1/4"

overall width, case overall length, case

4"

1.25

3-1/4"

center to center screw holes, case

1-3/16"

overall height, case

L

L

1-1/4" 1-5/8" 1-1/2" 7/32"

overall width, hook base

center to center holes, hook base

1.25

projection, hook

.31

thickness screw flanges

2.06 2.63

1.00

PKG QTY. 1

PKG QTY. 1

7/8 lbs.

weight each

(Two Part)

WESTERN GATE LOCKS Sold as a set or individual pieces ALL STEEL - Cadmium or Zinc Finish

ALL STEEL Cadmium or Zinc Finish

Regular Corner Plate SPAENAUR No. 099-272

#4

#2

7/8"

Spaenaur No.

Part

099-268 099-269 099-270 099-271

#1 #2 #3 #4

Handle

Bearing Cap Bearing Plate

CATALOG 14 CATALOG 14.02 2-1/2"

7/8"

3 Holes 3/8" Dia.

2018/12/05

Regular Side Plate

1-1/2"

5-7/8"

2-1/2"

2-7/8"

099-264

#1-4

Complete Lock Set

#3

4"

#1

NOTE: All mounting holes for 5/16" bolts. All above SPAENAUR No's. PKG QTY. 1

PKG QTY. 1

More Door Hold Backs on Pages L64-65

These popular locks operate smoothly, engage securely, and are ruggedly constructed for long service.

L65

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 20 NOV 2018