Section L

91 F Quarter Turn Fasteners Fixations quart de tour 91 F

Inch Pouce

91 F Series

Stud Assembly with WING HEAD

Stud Assembly with

Fastener Studs Bigger—Stronger Quarter Turns

SLOTTED HEXAGON HEAD

Wing Head

Total Range Thickness

Slotted Hex. Head

PKG QTY.

PKG QTY.

S

SPAENAUR

SPAENAUR

± .02"

“G”

No.

No.

110-091 110-092 110-093 110-094 110-095 110-096 110-097 110-099 110-100 110-101 110-103 110-104 110-106 110-107 110-108 110-109 110-110 110-111 110-112

110-115 110-116 110-117 110-118 110-119 110-120 110-122 110-123 110-124 110-128 110-129 110-130 110-131 110-132 110-133 110-134 110-135 110-136 110-137 110-138

10 .035-.064" .67" 10 .065-.094" .70" 10 .095-.124" .73" 10 .125-.154" .76" 10 .155-.184" .79" 10 .185-.214" .82" 10 .215-.244" .85" .245-.274" .88" 10 .275-.304" .91" 10 .305-.334" .94" 10 .335-.364" .97" 10 .395-.424" 1.03" 10 .425-.454" 1.06" 10 .485-.514" 1.12" 10 .515-.544" 1.15" 10 .545-.574" 1.18" 10 .575-.604" 1.21" 10 .605-.634" 1.24" 5 .635-.664" 1.27" 5 .665-.694" 1.30" .455-.484" 1.09"

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

. 565 .552

2.03 1.97

.33 .29

1.010 .990

. 98 .90

. 33 . 29

1.010 .990

.500 Max. When Locked

S ± .02

S ± .02

1.140 Max. When Locked

.378 .372

.378 .372 .625 APPROX. HALF SIZE .599

.625 .599 APPROX. HALF SIZE

5 5 5 5

.695-.724" 1.33" .725-.754" 1.36"

L

Illustration Dimensions in Inches.

Material: STEEL Finish: Zinc Plated & gold irridite Temperature Range: to 232 ° C (450 ° F)

1800 lbs. ultimate shear & tensile strength. 1200 lbs. rated shear & tensile strength.

GENERAL INFORMATION

TOTAL MATERIAL THICKNESS, “G” is comprised of the thick ness of ALL materials to be fastened. This must include the thickness of the material, “P” to which the stud assembly is attached; the material, “F”, to which the receptacle is attached PLUS gaskets (if used) and allowance for paint or other protective finishes.

approx. 3/4 size

91 F Series A rugged heavy duty quarter turn designed for those tough applica tions like farm and construction equipment, material handling equip ment and more. Slotted, Wing, and Offset Wing head styles available. Higher clamping force with 1800 lbs. ultimate shear and tensile strength.

G = P + F

P

F

CATALOG 14

“P” (Panel thickness) “F” (Frame thickness) “G” (Total thickness)

Receptacle

NOTE: Hole preparations are simple and provide 3/32" float in all directions to permit wide tolerances between outer panel and inner frame.

Continues on Next Page

L30

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018