Section L

Quarter Turn Fasteners & Parts Fixations quart de tour et pièces

Inch Pouce

STUD INFORMATION

15 F Series

SPAENAUR No. G = Grip Range S + .02 110-001 .030-.089" .91 110-003 .090-.149" .97 110-007 .210-.269" 1.09

G = Outer Panel P plus gaskets, paint, etc. + .015 (clearance)

4-Part PUSH BUTTON FASTENER A totally new kind of fastener that is as easy to install as it is to operate. One push of the button releases - one push locks. Single hole mounting cuts installation costs. No rivet holes, no riveting, no expensive tooling - for rapid production line installation. 300 lbs. ultimate tensile strength.

PKG QTY. 10 PKG QTY. 1

Finish: Bright Nickel Plate INSTALLATION DATA For STUD

Outer Panel: Drill .323 dia. hole. For panels thicker than .188, back counterbore to a remaining thickness of .188 max. Install stud and retainer as shown.

.52 .48

Dia.

.254 .234

.36 Max. When Locked

.188 Max.

P (.188 Max.)

S

Retainer-Install with prongs as shown.

.374 .354

.065 .045

P (Greater

.625 Dia. C' Bore

Than .188)

Steel, Nickel Plated

.230 .210

.318 .306

Dia.

RECEPTACLE

Screwdriver Slot

100° ±2°

FINISH

WT. - LB./100

SPAENAUR No.

.622 .610

Dia.

110-018

Cadmium Plated W/Clear Chromate

.987

PKG QTY. 10 PKG QTY. 1

INSTALLATION DATA For RECEPTACLE Inner Frame: For frames thicker than .080, drill .484 dia. (31/64 drill) hole and countersink 100 ° to .625" dia. x .015 deep. For frames thinner than .081, drill .406 dia. (13/32 drill) hole, dimple 100 ° to .670 dia. with .484 dia. clearance hole. Place receptacle in hole and secure with nut as shown.

.068 .048

.86 .80

L

15/32-32

.020 Clearance

Flat Area .425 .405

.434 .414

Across Flats

.080 Min.

.015

Dia.

Up to .080

RECEPTACLE - Zinc Alloy

RETAINING NUT

RETAINER

15/32"-32 NS-THREAD

.018 .012

.295 .305

Dia.

Width - 9/16"

To fit Receptacle Above (Spaenaur No. 110-018)

To fit Receptacle Above (Spaenaur No. 110-018)

.520 .500 Dia.

Across Flats

Thickness - 3/32"

.045 .025

SPAENAUR No. MATERIAL FINISH WT.-LB./100 110-020 Steel Cad, Gold .13 Chromate Plated PKG QTY. 10 PKG QTY. 1

FINISH

WT.-LB./100

SPAENAUR No.

110-019

.045

Zinc Plated with Chromate Finish

CATALOG 14

PKG QTY. 100 PKG QTY. 1

Stud, Retainer and Nut: Steel Receptacle: Zinc Alloy Vibration: Meets Specification Mil-F-5591 with 25 lb. load. Endurance: Meets Specification Mil-F-5591 Operable after 50 hours salt spray test.

SPECIFICATIONS:

L28

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 01 Feb 2018