Section L

Lift-Off & Large Offset Hinges

Metric Métrique

Charnières dégondables et grosses charnières décentrées

Metal Lift-Off Hinges Large - In-line Hinge In-line hinges can be used interchangably on doors hinged on either side.

Material and Finish KNUCKLES: Die-cast zinc, black matte polyester powder coating. WASHER: Black nylon Door and frame preparation Note: to insure lift-off capability, the lower knuckle must be installed on the frame, the upper knuckle on the door.

19 (.750)

31.5 (1.24)

SPAENAUR

See table for screw size.

Use

No.

Mfr. # Screw Size

097-046 96-10-500-50

No. 10-32

9.5 (.375)

Ø

56 (2.21)

T.P.I.(REF.)

Product Strength Guidelines

31.5 (1.24)

19 (.750)

AXIAL

Screws not supplied.

RADIAL

See table for screw size.

RADIAL Maximum working load 1300 N (300 lbs.) Average ultimate load 3300 N (1000 lbs.) AXIAL Maximum working load 2200 N (500 lbs.) Average ultimate load 9300 N (2100 lbs.)

PKG QTY. 2 Hinges (4 pieces)

10 (.391)

17.5 (.688)

15 (.594)

Note: Maximum screw length = door (or frame) thickness + 5 (.200).

Type "B"

Type "A"

Large - Offset Hinge Offset hinges must be ordered as Type "A" or Type "B" assemblies

millimeter (inch) Dimensions without tolerances are for reference only.

17.5 (.688) 10

(.391)

32.5 (1.28)

L

L

SPAENAUR

Use

No.

Mfr. # Screw Size Type

See table for screw size.

63.5 (2.50)

31.5 (1.24)

097-047 96-10-510-50

No. 10-32

"A"

50.8 (2.000)

These holes are not tapped.

097-048 96-10-520-50

No. 10-32

"B"

A

B

PKG QTY. 2 Hinges (4 pieces)

17.5 (.688)

See table for screw size.

Product Strength Guidelines

RADIAL Maximum working

9.5 (.375)

AXIAL

Ø

load 1300 N (300 lbs.) Average ultimate load 3500 N (800 lbs.) AXIAL Maximum working load 2200 N (500 lbs.) Average ultimate load 9300 N (2100 lbs.)

56 (2.21)

T.P.I.(REF.)

CATALOG 14

RADIAL

See table for screw size.

19 (.750)

31.5 (1.24)

Use Type “A” hinges

Use Type “B” hinges

LATCH LATCH

15 (.594)

FRAME

FRAME

DOOR

DOOR

10 (.391)

17.5 (.688)

Note: For non lift-off mounting use one type "A" and one type "B" hinge per door. One hinge knuckle must be mounted AFTER the door is hung.

L137 19 jan 2018

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com