Section L
Over-Center Draw Latch with Toggle Loquets à levier hypercentriques avec bascule
Metric Métrique
Over-center Draw Latch with Toggle Action • Lockable with tumbler type keylock • Latches/unlatches with over-centre toggle action • Finished in black powder coat or bright polished chrome • Mounts on outside of door
Material and Finish LEVER, PAWL, BASE, KEEPER and LOCK (when used): Die cast zinc, chrome plated or black powder coated. LOCK EXTENSION and LINK: Die-cast zinc with chemical protective film. LOCK SLIDE: Steel, zinc plate plus bright chromate dip.
097-049 shown (without lock).
52.4 ± 0.5 (2.06 ± .02 )
9.5 (.38)
9.5 (.38)
PKG QTY. 1
SPAENAUR No.
25.4 ± 0.1 (1.000 ± .005 )
52.4 ± 0.5 (2.06 ± .02 )
18 (.71)
Mfr. #
Style
33.3 (1.31)
9.5 (.38)
9.5 (.38)
097-049 Chrome Finish 097-095 Black Coat Finish
A7-10-301-30 Standard
25.4 ± 0.5 (1.00 ± .02 )
25.4 ± 0.1 (1.000 ± .005 )
10-32 x .38"
25.4 ± 0.1 (1.000 ± .005 )
A7-10-302-20 with lock *
18 (.71)
156 (6.13)
33.3 (1.31)
22 (.88)
127 (5.00)
* Locks are keyed alike.
25.4 ± 0.5 (1.00 ± .02 )
25.4 ± 0.1 (1.000 ± .005 )
32 (1.25)
10-32 x .38"
22 (.88)17 5 (.69)
156 (6.13)
Product Strength Guidelines Maximum working load: 2200 N (500 lbs.) Average ultimate load: 3700 N (825 lbs.)
22 (.88)
127 (5.00)
32 (1.25)
22 (.88)17 5 (.69)
L
L
Unlatching Raise handle; action is reversed. Force C results in opposite force D applied through latch; door is mechanically pried open a distance of 7.9 (0.31) .
Latching Lower handle. Latching pawl engages keeper, applies force A. Resultant force B closes and latches door with over-centre toggle action, 9.5 (0.38) pull-up distance.
millimeter (inch) Dimensions without tolerances are for reference only.
CATALOG 14
Standard and Key Locking Assemblies with Finish of Satin Silver Powder Coat available.
L131
P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 jan 2018
Made with FlippingBook Digital Publishing Software