Section L

Vise Action ® Compression Latches

Metric Métrique

Loquets à mécanisme de compression Vise Action MD

Pawl-positioning Design • Provides consistent compression • Operates with two steps • Positioning pin assures proper latching

SMALL

HANDLE AND SLEEVE: Die-Cast Zinc SPRING: 302 Stainless Steel PAWL and PAWL RETAINING CLIP: 1010 Steel, Zinc Alloy Plate

GRIP (SEE TABLE)

MAX. OUTER PANEL THICKNESS = 6 (.234)

PAWL FORWARD

PAWL REVERSED

Other grip ranges order special.

19 (.75) 16

SLEEVE 5/8-24 Thread

GRIP

SPAENAUR No. Black

LONG PIN

34 (1.34)

HANDLE

(.63)

Polished Polyester

SHAFT M8 Thread

Min.

Max.

Chrome

Powder Coated

097-018 097-019 Mfr.#62-10-21 Mfr. #62-10-25

2 (.08)

12 (.47)

5 (.19) PULL-UP

57 (2.25)

097-082

—

12 (.47)

22 (.87)

PAWL RETAINING CLIP

55 (2.15)

LOCKWASHER

Mfr.#62-10-31 *097-082 *097-018

JAM NUT

LIFT AND TURN

—

22 (.87) 32 (1.25) 32 (1.25) 42 (1.66) 42 (1.66) 52 (2.05)

MOUNTING NUT

*097-019

MTG. LOCKWASHER

— —

5 °

Product Strength Guidelines - Small Size Maximum working load: 550 N (125 lbs.) Average ultimate load: 1100 N (250 lbs.)

* Reversed

32 (1.25)

39 (1.53)

13 (.50)

Pawl position

GRIP (SEE TABLE)

MEDIUM

MAX. OUTER PANEL THICKNESS = 6 (.234)

PAWL FORWARD

GRIP

SPAENAUR No.

PAWL REVERSED

Black Polished Brushed Powder Chrome Chrome Coated

GASKET

SLEEVE 5/8-24 Thread

LONG PIN

19.5 (.77)

Min.

Max.

34 (1.34)

HANDLE

097-090

—

—

SHAFT M8 Thread

0 (0)

5 (.20)

Mfr. # 62-30-11

LIFT AND TURN

097-020 097-021 097-079 Mfr. # 62-30-21 Mfr. # 62-30-22 Mfr. #62-30-25

5 (.20)

15 (.59)

5 (.19) PULL-UP

35 (1.37) 45 (1.77) 45 (1.77) 55 (2.16)

097-020 * 097-090 *

*097-021

*097-079

PAWL RETAINING CLIP

80 (3.16)

LOCKWASHER

— —

JAM NUT

79 (3.13)

MOUNTING NUT

* Reversed

MTG. LOCKWASHER

Pawl position

Product Strength Guidelines Medium style M aximum working load: 670 N (150 lbs.) Aver age ultima te load: 1100 N (250 lbs.)

L

13 (.50)

32 (1.25)

42 (1.65)

INSTALLATION FOR ABOVE LATCHES

SMALL & MEDIUM SERIES

Dimen sion

FRAME for top latching

23 +2 -1 (.93 ± .06) 28 +2 -1 (1.10 ± .06)

PAWL REVERSED PAWL FORWARD

FRAME for side latching

A

B

2. Assemble as shown.

A

16.3 +0.1 -0.0 (.640 +.005 ) - .000 13.7 +0.1 -0.0 (.540 +.005 ) - .000

B

ø

C

DOOR

C

LIFT AND TURN

A

3. Pawl should be adjusted to GRIP measurement with the door open and the handle in the LATCHED position. Use two wrenches to tighten.

CATALOG 14 CATALOG 14.12

1. Locate and orient hole with respect to handle in latched

position (as shown in next step). This hole orientation is preferred for all latching positions.

millimeter (inch) Dimensions without tolerances are for reference only.

All items on this page PKG QTY. 1

L104

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018