Section L

Support Stays Bras de support

Inch Pouce

099-184 (with brackets) 099-B07-1M (without brackets)

(Mfr. # 7/25122)

(Mfr. # 7/26596)

A

PKG QTY. 1

B

E

F

“Miniature” Support Stays These stays are smaller versions, and suit a variety of top and side-opening cabinets, instrument boxes, etc. The stays lock in open position by means of a “Star-Wheel” design, and are released by slight further extension. Material: STEEL Finish: ZINC PLATED

C

D

G

H

J

A. Length closed 6" open 9.4" B. Width (outer) 0.75" C. Width (inner) 0.67" D. Location 0.65"

E. Hole centres 0.5" F. Hole centres 0.5" G. Location 0.65" H. Hole dimensions 0.138" dia. J. Brackets Height 0.5"

Note: Safety catch fitted to this type of stay.

L

K

J

099-185 (with brackets)

(Mfr. # 7/25621)

N

PKG QTY. 1

M

P

This stay incorporates a safety catch. To operate, the stay is extended slightly, and the catch released by hand. There are brackets at each end, pivoting freely, and these are individually shaped. Length between fixing centres is 11.2" (closed), 18.5 (open) - not including brackets. Material: STEEL Finish: CLEAR or YELLOW ZINC — our option

R

Q

S

J. Location 0.9" K. Length closed 11.2" open 18.5" L. Location 0.9" M. Hole centres 1.25"

N. Width (bracket) 2.0" P. Hole centres 0.75" Q. Location 0.35" R. Hole dimensions 0.197" dia. S. Location 0.5"

L

G

099-186 (with brackets)

Mfr. # (7/03098)

H

PKG QTY. 1

F

E

A basic but extremely popular design with “draw” of 8-1/2" approx., and identical brackets at each end which can swivel freely. The stay locks in the extended position by means of a “Star-Wheel” design, and a further slight extension then frees the mechanism and allows the unit to be closed. Length between fixing centres is 11.4" (closed), 19.5" (open) - not including brackets.

A

B

D

J

CATALOG 14

C

A. Width (outer) 1.0" B. Length closed 11.4" open 19.5" C. Height (outer) 0.43" D. Location 1.1"

E. Hole centres 1.378" F. Width (bracket) 2.25"

Material: STEEL Finish: CLEAR or YELLOW ZINC — our option

G. Hole dimensions 0.354" dia. H. Hole dimension 0.236" dia. J. Bracket Height 0.55"

L70 19 Jan 2018

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com