Section L

Lift-Off & Miniature Offset Hinges

Metric Métrique

Charnières dégondables et charnières décentrées miniatures

Metal Lift-Off Hinges • Allows the door to be removed from the hinge side • Compact size with high strength/size ratio • All mounting hardware is concealed • Door can also be permanently installed

8.7 (.34)

28 (1.10)

Miniature-In-line Hinge In-line hinges can be used interchangably on doors hinged on either side.

19.1 (.75)

8.4 (.33)

Screw length = door or frame thickness +5 (.200) .

Product Strength Guidelines

28 (1.10)

Material and Finish KNUCKLES: Die-cast zinc, black polyester powder coated.

AXIAL

RADIAL

11.3 (.44)

RADIAL Maximum working

load 1100 N (250 lbs.) Average ultimate load 2400 N (530 lbs.) AXIAL Maximum working load 1250 N (280 lbs.) Average ultimate load 2600 N (580 lbs.)

SPAENAUR

Use

12.7 (.50)

No.

Mfr. # Screw Size

097-043

6-32

96-110

Ø5.1 (.20)

PKG QTY. 1

Note: Maximum recommended tightening torque for mounting screws: 1.1 N•m (10 in.-lbs.)

Miniature-Offset Hinge

Door and frame preparation Note: to assure lift-off capability, the lower knuckles must be installed on the frame, the upper knuckles on the door. For non-lifting off offset hinges only: Use one type "A" and one type "B" hinge per door.

Type “A”

Type “B”

Offset hinges must be ordered as type "A" or type "B" assemblies.

9.5 (.38)

4.7 (.19)

L

20 (.79)

0.8 (.03)

Ø5.1 (.20) BOSS, TYP.

SPAENAUR

Use

A

B

No.

Mfr. # Screw Size Type

25.5 (1.00)

097-044 097-045

6-32

"A"

96-111

9.8 (.39)

millimeter (inch) Dimensions without tolerances are for reference only.

9.5 (.38)

6-32

"B"

96-112

PKG QTY. 1

Also available M4 Thread.

11 (.44)

4.5 (.18)

B

Product Strength Guidelines

8 (.32)

A

AXIAL

PKG QTY. 2 Hinges (4 pieces)

AXIAL M aximum working load 1250 N Average ultimate load 9300 N

Screws not supplied.

Ø5.1 (.20) BOSS, TYP.

15.6 (.62)

CATALOG 14

9.3 (.37)

RADIAL M aximum working

0.8 (.03)

RADIAL

load 1100 N (250 lbs.) Average ultimate load 2400 N (530 lbs.)

4.7 (.19)

9.5 (.38)

Use Type “A” hinges

Use Type “B” hinges

LATC H

LATCH

FRAME

FRAME

DOOR

DOOR

L138

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018