Section L

Adjustable Draw Latches Loquets de tirage réglables

Metric Métrique

Adjustable Draw Latch Multiple sizes and latching styles • Ball-end Latching Rod • L atching rod adjusts to fit your grip range • Steel or Stainless Steel available

LEVER and HOUSING: 1010 steel. ROD GUIDE and JAM NUT: Low carbon steel. SERIES 700 ROD: 1008 steel. SERIES 500 ROD: 1006 steel. KEEPER: 1 064 steel. Steel components are zinc plated plus bright chromate dip.

500 and 700 Series

KEEPER

Stainless Steel (700 SERIES) LEVER and HOUSING: 304 Stainless steel, passivated. ROD and RIVET: 302 stainless steel, passivated. KEEPER: 17-7PH stainless steel.

JAM NUT

K

L

ROD GUIDE and PIN

F

H

A

G TYP.

SPAENAUR No.

LATCH ASSEMBLY

D

Mfr. #

Material

Series

M5 thread (500 series) 5/16-18 UNC thread (700 series)

M

Ø

B

097-014 A1-10-501-10 steel - zinc plated 500 097-806 A1-10-501-40 stainless steel 500 097-807 A1-10 701-40 stainless steel 700

LEVER

HOUSING

LATCHING ROD CASE/LID SEPARATION

C

J

Above numbers include latch and keeper.

N

E

Dimensions

Series

A B C D E F G H I

J

K L M N

Available with vinyl grip.

500 27 68 20 21 1.6 4.4 5 22 14 11 13 8 5.2 1.3 (1.06) (2.66) (.78) (.82) (.060) (.17) (.19) (.88) (.56) (.44) (.50) (.31) (.203) (.050)

40 113 32 31 1.9 7 6 31 19 19 19 11 6.7 1.5 (1.56) (4.45) (1.25) (1.21) (.075) (.27) (.25) (1.21) (.75) (.75) (.75) (.44) (.265) (.060)

700

To Adjust 1. With rod and lever in latched

LATCHING ROD

LEVER

2. Raise lever and tighten jam nut hard against rod guide using an open end wrench. Use Phillips screwdriver to prevent latching rod from turning.

L

L

JAM NUT

position, turn latching rod with a Phillips screwdriver until desired tension is reached.

LATCHING ROD

KEEPER

Product Strength Guidelines 500 Series - Maximum working load: 180 N (40 lbs.) Average ultimate load: 330N (75 lbs.) 700 Series - Maximum working load: 890 N (200 lbs.) Average ultimate load: 178 N (400 lbs.)

CASE/LID SEPARATION

Four mounting holes, Ø O

S

R

millimeter (inch) Dimensions without tolerances are for reference only.

Installation Prepare case and lid as shown and mount both latch and keeper using four screws or rivets.

CATALOG 14

P

Q

Installation Dimensions

ø O

P

Q

R

S

+0.2 to -0.0 +0.1 to -0.2 Series (+.010 to -.000) (+.005 to -.010)

± 0.2 (.005) 12.7 (.500)

± 0.2 (.005) 6.4 (.250)

Min.

Max.

500 700

5.2 (.203) 6.7 (.257)

25.5 (1.000) 44.5 (1.750)

25 (1.00)

44 (1.75) 57 (2.25)

PKG QTY. 1

24 (.94)

19 (.750)

9.5 (.375)

L127

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018