Section L

Grabber ™ Door Catch Loquets de porte Grabber

Metric Métrique

Grabber™ Door Catch

HIGH IMPACT - ABS REINFORCED NYLON

With Nylon Keeper

Mounts inside your enclosure • Heavy duty keeper • Push to close, pull to open

Keeper

11.5 (.45)

23.8 (.94)

• Spring loaded over-centre latching • Choose from three pull-up forces • Corrosion resistant

4 (.16)

Catch

28 (1.11)

5.1 (.20)

14.5 (.57)

55 (2.17)

13.7 (.54)

72 (2.83)

8 (.32)

Orientation indicator

4 (.16)

48.5 (1.90)

40.5 (1.60)

3.3 (.13) TYP.

4.3 (.17) TYP

4 (.16) TYP

2.5 (.1)

3.8 (.15)

5.3 (.21) REF.

2 holes, Ø 3.3 (.13) TYP.

Right side installation shown. Invert catch and keeper for left side installation.

Mfr. No.

Approximat e Pull-up force 13 N (3.0 lbs.) 22 N (5.0 lbs.) 44 N (10.0 lbs.)

SPAENAUR

No.

097-829 097-818 097-819

PKG QTY. 1

C3-803

C3-805

C3-810

Panel Preparation Note: Max. tightening torque for catch = 1.1 N•m (.81 ft. lbs.) Max. tightening torque for keeper = 2.8 N•m (2.07 ft. lbs.) Installation 1.Mount CATCH to frame. 2.Orient KEEPER to latch, then mount to door and adjust for smooth latching.

L

L

+0.1 - 0

+.004 - 0

Two holes Ø3.3

(.130

)

for M3 or No. 4 size screws

7 (.2

millimeter (inch) Dimensions without tolerances are for reference only. F lamma bility Rating ABS Components: UL 94 - HB Operating T em perature Range: -30 ° C to 60 ° C (-20 ° F to140 ° F) Material and Finish SPRING: 302 Stainless steel, 13 N (3 lb.) passivated, blue organic coating; 22 N (5 lb.) passivated; 44 N (10 lb.) passivated black oxide. RIVET: 5056 Alu m inu m, natural. HOUSING: ABS, black. SUPPORT ROD, SPRING SUPPORT and PAWL: Glass fiber reinforced nylon, black. KEEPER: Mineral filled nylon, black.

+0.0 - 0.3

76

DO

+0 -.012

FRAME

)

OR

C o f doo r hol L

es

C of frame holes L

55 ± 0.5 (2.1 65 ± .02

0 ± 2 (0 ± .079)

0)

.3

+0 - 0

)

40. 5 (1.6

12

+.0 - 0

00

Ø 4 For size

.3

+0.1 - 0

( .16 or No. ews

M4

9

+.004 - 0

CATALOG 14

scr

) TYP

8

. 2

)

04

+.0 - 0

(.618

.1

+0

15.7 or for adjustability 24.7 (.972 ) SeeNOTE - 0 +0 - 0 .3 +0 - .0 12

Minimum distance from frame (or surface on which catch sub-assembly is mounted) to centerline of door hinge is 150 (5.9) MIN.

NOTE: These holes and dimensions are used only if adjustability through the use of slotted holes in catch is desired.

L109

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018