Section L

184

Flush T-handle · Adjustable grip

Flush T-Handle Latch

Metric

Verrous à poignée en T affleurante

Métrique

27.8 (1.09) Minimum 39.7 (1.56) Maximum Handle Grip range

SPAENAUR No. 097-212

Mfr. #24-20-812-35 • Concealed mounting type Material and Finish Zinc alloy and steel, zinc plated or stainless steel Performance Details Maximum static load: 445 N (100 lbf) Installation Notes Maximum tightening torque of mounting nuts not to exceed 2.8 N  m (25 in  lbf) Keys See page 120 and 169-175 24 Cam Latch Flush T-handle · Adjustable grip 65.1 (2.56) 90 0 approx.

65.1 (2.56)

Cam Latch Flush T-Handle • Adjustable Grip Zinc Alloy • Zinc Plated

90 0 approx.

114.3 (4.50)

82.6 (3.25)

Cam Cup Lock assembly option

57.2 (2.25)

20.6 (.81)

30.2 (1.19)

30.2 (1.19)

88.9 (3.50)

Grip range

ncealed mounting type al and Finish oy and steel, zinc plated or s steel mance Details um static load: 100 lbf) ation Notes

Door 7.9 (0.31) Maximum

27.8 (1.09) Minimum 39.7 (1.56) Maximum Handle

Part Number

2 Holes, Ø 6.5 (.26) in actuator for attaching rods

114.3 (4.50) • Concealed mounting type Performance Details Maximum static load: 445 N (100 lbf) Installation Notes Maximum tightening torque of mounting nuts not to exceed 2.8 N•m (25 in•lbf) Part Number 57.2 (2.25)

With Mounti

17.5 (.69)

Style

Cup and bracket polished stainless steel. Handle zinc chrome plated

Other options available. For complete details on variety, part numbers, installation and specification, go to

82.6 (3.25)

34.9 (1.38)

Locking keyed alike CH751 supplied

24-20-812-35 24-20-302-35 24-20-312-35

Cam Cup Lock assembly option

Non-locking

Hex nut Lock arm

Non-locking environmentally sealed

20.6 (.81)

38.9 (1.53)

30.2 (1.19)

88.9 (3.50) With Mounting Studs Cup and bracked polished stainless steel Handle zinc chrome plated SPAENAUR No. 097-212 Mfr. #24-20-812-35

30.2 (1.19)

65.1 (2.56)

um tightening torque of ng nuts not to exceed m (25 in  lbf)

69 Cam Latch Arrowhead · Detent design · Adjustable grip Part Number Dimensions in millimeters (inch) unless otherwise stated

Style

With Mounting Studs

ge 120 and 169-175

L

Style

Cup and bracket polished stainless steel. Handle zinc chrome plated

Cup and bracket steel dacrotized. Handle zinc dacrotized

available. For complete details t numbers, installation and pecification, go to

Cam forward rev G Grip ra

Locking keyed alike CH751 supplied

24-20-812-35 24-20-302-35 24-20-312-35

24-20-812-10 24-20-302-10 24-20-312-10

• Arrow indicates cam orientation • Single hole installation • Detented design • Adjustable grip Material and Finish Nylon and steel, zinc plated Performance Details Small size working load: 44 N (10 lbf) Medium size working load: 220 N (50 lbf) Large size working load: 330 N (75 lbf) Ferrule

Non-locking

Non-locking environmentally sealed

Ferrule

Sleeve

Pin

S

69 Cam Latch Arrowhead · Detent design · Adjustable grip

A

CATALOG 14 CATALOG 14.12

Lock nuts

Knob

E Mounting nut

B

G

Grip range

C

ow indicates cam entation gle hole installation ented design ustable grip

SMALL

Cam forward

Cam reversed

G Grip Range

Size Part Number

A

B

Minimum Maximum

Lock washers

Small

69-10-301-11 4 (.16)

28.2 (1.11) 33.3 (.13)

12.7 (.50) 19.1 (.75)

12.7 (.50) Max. 17.5 (.69) Max. 25.4 (1) Max.

Sleeve

MEDIUM

Medium 69-10-401-11 3.2 (.13) Large 69-10-501-11 4.8 (.19) Pin Shaft D

L108.1

Other options available. For complete details on variety, part numbers, installation and specification, go to A P: 1-800-265-8772 F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. 61.9 (2.44) 28.6 (1.13)

al and Finish nd steel, zinc plated

Dimensions in millimeters (inch) unless otherwise stated

www.southco.com/69

Lock nuts