Section L

First page 1 Next page Last page

Latches, Handles, Clamps & Hinges

Section L

Latches, Handles, Clamps & Hinges

Loquets, poignées, grenouillères et charnières

Multi-Purpose / Automotive Lever Handles & Locks Including General Information Tee Handles, Locking Knobs & Locker Locks

Poignées et serrures multifonctions / automobiles incluant des renseignements généraux Poignées en T, boutons à serrure et serrures de casiers Serrures à came Clés à came, couvercle de verrouillage du compartiment étanche, minipoignée, serrures à cliquet, verrous à goupille pour porte coulissante Loquets à levier, loquets de tension; Loquets et pièces de serrures; Loquet à ressort et ensemble de goujon

Inch

Pouce

L8, L11

Inch

Pouce

Cam Latches & Locks Cam Keys, Waterproof Compartment Lock Cover, Mini Handles, Ratchet Locks, Sliding Door Pin Locks

L10

Inch & Metric

Pouce et métrique

Draw Latches, Tension Latches; Latch & Lock Parts; Spring Catch & Stud Assembly

L16

Inch

Pouce

L28 , L34, L152

Fixations à quart de tour et pièces

Quarter Turn Fasteners & Parts

Inch

Pouce

L33

Pull & Grab Handles

Poignées de tirage

Inch

Pouce

L39

Multi-Purpose Handles & Cams

Poignées et cames multifonctions

Inch

Pouce

Poignées de type cadenas EBERHARD MD

Padlock Type Drop Handles EBERHARD ®

L40

Inch

Pouce

Verrous à claquer, loquets à ressort et verrous à verrou; loquets à compartiments, verrous et clés EBERHARD MD , ECLIPSE ® Poignées de palette; poignées à bouton-poussoir; Joints de bride EBERHARD MD , ECLIPSE ® Poignées en «T» encastrées et pliantes EBERHARD MD Loquets à ressort rotatifs et pièces; Mini Loquets à ressort rotatifs et pièces EBERHARD MD Loquets de compartiments et serrures de porte EBERHARD MD Loquet à pêne à ressort; loquet à crochet; pièces pour loquets et verrous

Slam Latches, Spring Latches & Bolt Latches; Compartment Latches, Locks & Keys EBERHARD ® , ECLIPSE ® Paddle Handles; Push Button Handles; Flange Gaskets EBERHARD ® , ECLIPSE ® Recessed & Folding “T” Handles EBERHARD ® Rotary Slam Latches & Parts; Mini Rotary Slam Latches & Parts EBERHARD ® Compartment Latches & Door Locks EBERHARD ®

L42

Inch

Pouce

L45

Inch

Pouce

L52

Inch

Pouce

L53

Inch

Pouce

L57

Inch

Pouce

Spring Bolt Latch; Finger Hook Latch; Latch & Lock Parts

L63

Inch

Pouce

CATALOG 14

L64

Door Hold-Backs

Retenues de porte

Inch

Pouce

LTOC1

P: 1-800-265-8772 F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.

Latches, Handles, Clamps & Hinges

Loquets, poignées, grenouillères et charnières

Rope Tie Downs & Binding Hooks Formed & Recessed

Anneaux et crochets d’arrimage pour corde Façonnés et encastrés

L66

Inch

Pouce

Loquet à moraillon; poignées pour tige carrée; loquet à ressort; retenue et poignée de porte Supports pour sièges pliants, marchepieds pliants et bras de support Roulettes guides pour porte pliante, équerre à charnière et ridelles Ventilateurs à double action à usages multiples et de plafond

Hasp Latch; Box Rod Handles; Spring Latch; Door Hold Back & Handle

L67

Inch

Pouce

Folding Seat Brackets, Folding Steps & Support Stays Folding Door Roller Guide, Hinge Bracket & Stake Racks

L68

Inch

Pouce

Double Action Multi-Purpose & Roof Ventilators

L71

Inch

Pouce

Pentures et charnières en «T» de réfrigération; pentures épaisses et charnières en «T» épaisses

L72, L75

Refrigeration Strap & T-Hinges; Heavy Strap & T-Hinges

Inch

Pouce

L73

Loquets à ressort pour réfrigérateurs

Refrigeration Slam Latches

Inch

Pouce

Charnières légères, épaisses et larges

Butt Hinges Light, Heavy & Broad

L80

Inch

Pouce

L83

Inch & Metric

Pouce et métrique

Block Hinges

Charnières bloc

L84

Symmetrical Hinges

Charnières symétriques

Inch

Pouce

L86

Inch & Metric

Pouce et métrique

Lift-Off Hinges

Charnières soulever

Low Profile (Flat) & Decorative (Small) Hinges

Charnières à profil bas (plates) et décoratives (petites)

L87

Inch & Metric

Pouce et métrique

Acrylic & Metallic Piano (Continuous) Hinges

L88

Charnières piano en acrylique ou en métal

Inch

Pouce

L91

Crochets et fermoirs de capot d’automobile

Automotive Hood Hooks & Catch Plates

Inch

Pouce

CATALOG 14

L95 L95

Southco MD Table des matières

Southco ® Table of Contents

Metric

Métrique

L153

Section Index

Index de section

L154

LTOC2

Multi-Purpose Handles & Locks - General Information Poignées et serrures multifonctions – renseignements généraux

Inch Pouce

General Information (Pages L3 to L11 incl.)

Suitable for use on all types of cabinets and equipment. Zinc base diecastings, finished in flawless heavy chrome plate, hand polished. (D-1410 Series has Satin Chrome finish — page L9.) Flat escutcheon bases for attachment to flat surface. Two keys with each locking handle or lock. LOCKS: Brass disc tumbler mechanism, corrosion-free phosphor bronze springs, in die-cast barrel. Polished stainless cap. DIFFERING: Each lock is available with 200 different combinations. SUITING: Most locking devices shown on pages L3, L4, L5, L6, L8, L9, (except D-1415 Series), L10 and L11 can be supplied suited with each other (i.e. with the same key number) on a special order basis. Prices on request. * MASTER KEYING: Available as shown. Master keys (available from stock) to be ordered separately. ** EXTRA KEYS: Available to special order. ** BLANK KEYS: Available from stock. PKG QTY. 1

*Master Keying

Description

Master Lock Series Page No.

Master Key

D-1408RMK D-1408LMK D-1406RMK D-1406LMK D-1410RMK D-1410LMK D-1411MK D-1413MK D-3006MK D-1414MK

Lever Handles

When ordering Master Key D-1406-8KM92 please specify the master key lock number on pages specified.

Tee Handles

Locking Knobs

Cam Locks

L10

Cam Locks

L11

The design, finish, appearance, durability and all-round quality of these SPAENAUR locking devices are second to none ---- yet the prices are remarkably reasonable.

Series 92 designations are shown on pages L3, L4, L8, L9, L10 and L11.

**Extra Keys — Blank Keys

(Extra Keys) How to order: When ordering, please specify the number which is stamped on your key and also include the SPAENAUR number of the handle or lock. If key number is unavailable then submit just the handle number or lock number. Order blank key by Series No.: D-1406-8KB92 Key Blank — For Series 92.

KEY LOCK OPTIONS

CATALOG 14

Keyed to Differ Mastered

Keyed Alike

Keyed to Differ Non-mastered

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com 19 Jan 2018

Multi-Purpose Lever Handles & Locks Poignées à levier et serrures multifonctions

Inch Pouce

D-1408 Series LEVER HANDLES For steel lockers, cupboards, office furniture, electrical cabinets and equipment panels. 3-point locking mechanism (removable): a plated steel cam and bolt pick-up mechanism is supplied to enable espagnolette bolt action to be used. (Locking rods are not supplied.) Each handle has a 3" long spindle which may be cut down by user to required length. (Special spindle lengths may be supplied on a special order basis. Minimum quantity 500 one number or assorted in D-1408 Series.) ZINC BASE DIECASTINGS

3/8"

1-5/8"

1-1/4"

3/16"

5/16" Sq.

1-3/8"

1-3/4"

1-1/2"

2-1/4"

5/8"

3/16"

3" Spindle

7/8" Dia. Hole in Door

Chrome Plated Finish

D-1408R

1-7/16"

Description For More Handles see Pages L33 to L53. Locking handle, with 2 keys, all to differ, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Locking handle, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° clockwise to open. Locking handle, with 2 keys, all keyed alike, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Locking handle, with 2 keys, all keyed alike, for fixing to right edge of left door. Action 90 ° clockwise to open. Locking handle, master keyed, with 2 keys, all to differ, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Locking handle, master keyed, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° clockwise to open. Non-locking handle, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Non-locking handle, for fixing to right edge of left door. Action 90 ° clockwise to open. Dummy fixed handle, non-operating, no spindle, no locking mechanism. Acts as a door pull, or to give a balance to the operating handle. Order Master Keys separately. See Page L2. PKG QTY. 1

SPAENAUR No.

D-1408R D-1408L

D-1408RKA D-1408LKA D-1408RMK D-1408LMK D-1408NR D-1408NL

29seireS

CATALOG 14

D-1408D

Multi-Purpose Lever Handles & Locks Poignées à levier et serrures multifonctions

Inch Pouce

LEVER HANDLES

For Automotive and Multi-Purpose Use Each handle has a 5" long spindle which may be cut down by user to required length. (Special spindle lengths may be supplied on a special order basis. Minimum quantity 500 one number on special spin dle length orders.)

Spindle is 5/16" square

1-5/8"

Flat Escutcheon

Escutcheon Holes 1-3/4" Centre to Centre

ZINC BASE DIE-CASTINGS

Chrome Plated Finish

For More Handles see Pages L33 to L53.

SPAENAUR No.

DESCRIPTION

096-233

Locking handle, with 2 keys, all to differ, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Locking handle, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° clockwise to open. Locking handle with 2 keys, all keyed alike, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Locking handle, with 2 keys, all keyed alike, for fixing to right edge of left door. Action 90 ° clockwise to open. Non-locking handle, for fixing to left edge of right door. Action 90 ° anti-clockwise to open. Non-locking handle, for fixing to right edge of left door. Action 90 ° clockwise to open.

096-234

29seireS

096-235

096-236

096-237

096-238 096-273 096-232

CATALOG 14

Same as 096-238 except spindle is 1-1/2" long.

Locking handle SET OF TWO (one left and one right handle) with same key (2 Keys included). Each SET is keyed to differ.

To order Master Keys and for Additional Data see Page L2.

PKG QTY. 1

( except 096-232 Set has 1 L.H. & 1 R.H.)

Lever Handles Locking / Non Locking Poignées à levier verrouillables / non verrouillables

Inch Pouce

Rotary Handles - “Lever L”

DIE-CAST - CHROME PLATED FINISH

PLAIN SHAFT - MILD STEEL

No. 096-336 comes with 2 locking keys. All to differ.

PKG QTY. 1

Max. Dimensions of escutcheon: 1-1/4" x 2-1/2" Escutcheon fixing centres: 1-1/2" standard

A. Max. height 1.6" (41 mm) B. Standard shaft 4.5" (115 mm) C. Max. width 1.0" (25 mm)

D. Max. length 4.5" (115 mm) E. Fixing detail 0.55" (14 mm) F. Fixing detail 0.4" (10 mm)

Non-Locking Locking 096-337 096-336

Shaft is 5/16" (7.94 mm) square.

These elegant die-cast handles are intended as a simple and versatile method for securing industrial cabinets and enclosures, and in certain cases may also be suitable for vehicle uses. The handles can be used to operate our slam or compartment latch (‘dead bolt’) products, or will take a simple locking tongue, or cam, illustrated on page L39 in this catalog. For fixing to right or left edge of door. Action 180 ° clockwise to open.

Rotary Handles

DIE-CAST - CHROME PLATED FINISH

PLAIN SHAFT - MILD STEEL

For fixing to right or left edge of door.

096-338 Non-Locking

Action 360 ° clockwise or anti-clockwise to open.

PKG QTY. 1

No. D-316 comes with 2 locking keys. All to differ.

D-316 Locking

C Handle

CATALOG 14

A most popular handle, fitted as original equipment upon all types of vehicles worldwide. Strong, smoothly-styled with no sharp projections, the distinctive ‘elongated pear-shape’ is seen upon tractors and excavators, on rear-opening vans and trailers, and also mounted in a vertical position for sliding slam-type doors and shutters. Useful for ‘industrial’ purposes, i.e. electrical consoles and cabinets particularly in black powder-coated finish.

A. Max. height 2.0" (51 mm) B. Standard shaft 5.0" (127 mm)

C. Max. width 1.0" (25 mm) D. Max. length 4.1" (105 mm) E. Fixing detail 0.7" (17 mm) F. Fixing detail 0.9" (21 mm) Shaft is 5/16" (7.94 mm) square. Escutcheon fixing centres: 1-1/2" standard.

Multi-Purpose Lever Handles & Locks Poignées à levier et serrures multifonctions

Inch Pouce

PKG QTY. 1

Large-size Modern Handle Range

5/16" Square Shank

This attractive, new design meets the need for a relatively heavy duty handle which can operate substan tial mechanisms. Normal finish is black, with ‘FT’ shuttered device, 90 ° rotation LH or RH. A non-locking version is also available. The handles can be spring loaded on request.

2 Keys Included

90° LH

90° RH

SPAENAUR No.

Description

096-011 096-012 096-013 096-014

Locking LH Handle Locking RH Handle

A. Length 7.25" (185 mm) B. Width 1.45" (37 mm) C. Height 1.55" (39 mm) D. Hole centres 1.75" (44 mm)

E. Projection 0.50" (13 mm) F. Shaft length 5.0" (125 mm) G. Clearance 1.1" (28 mm)

Non-Locking LH Handle Non-Locking RH Handle

H. Hole dia. 0.21" (5.5 mm) Note: The escutcheon contains open mounting holes for exterior fixing: however, these are concealed and inaccessible when handle is in a locked position. Drawing shows handle with return-spring fitted.

LEVER LATCH HANDLE 096-335 Zinc Base Die-Cast CHROME PLATED

PKG QTY. 1

2-1/4"

1-1/2"

5/16" square x 2-7/8" long shank

1-3/4"

LOCKING TEE HANDLE

2-13/32"

096-262

"23/1-5

Action 90 ° clockwise to open.

Shank is 5/16" square x 3-3/4" long.

"4/1-4

CATALOG 14

Action 360 ° rotation.

Zinc Base Die-Cast CHROME PLATED

All Locking Handles this page Keyed to Differ.

Multi-Purpose Lever Handles & Locks Poignées à levier et serrures multifonctions

Inch Pouce

“Traditional” Handle Designs Elegant and functional, these handles have many applications.

“DB Series”

360 Degree Rotation

Available in Locking or Non-Locking Material: Zinc based alloy die-cast.

096-001 Key-Locking, Chrome Finish 096-002 Non-Locking, Chrome Finish

Mounting Holes Center to Center 1.75"

Locking models supplied with two keys.

Shank 5" long x 5/16" square.

PKG QTY. 1

“Boot T” Series

The “Boot T” is so called because it suits a great many vehicle uses. It can also be used as a neat, stylized handle for any other “rotary” functions. Material: Zinc based alloy die-cast. Finish: Chrome.

360 Degree Rotation

096-005 Key-Locking

Mounting Holes Center to Center 1.75" 096-021 Key-Locking Mounting Holes Center to Center 1.50" (above no.) Locking models supplied with two keys.

Shank 5" long x 5/16" square.

PKG QTY. 1

“Arched”-Style Handles

A slim, tapered handle design, this handle is slightly larger than the “DB” series, at 5.2" (130 mm) . Material: Zinc based alloy die-cast. Finish: Chrome.

PKG QTY. 1

096-015 Key-Locking 096-017 Non-Locking Mounting Holes Center to Center 1.75" 096-019 Key-Locking 096-020 Non-Locking Mounting Holes Center to Center 1.50" 096-016 Key-Locking 096-018 Non-Locking Mounting Holes Center to Center 1.43"

CATALOG 14

360 Degree Rotation

Shank length range 4-1/2" - 5" long x 5/16" square.

Keyed to Differ.

Locking models supplied with two keys.

Multi-Purpose Tee Handles Poignées en T multifonctions

Inch Pouce

D-1406 Series

TEE HANDLES

For steel lockers, cupboards, office furniture, electrical cabinets and equipment panels. 3-point locking mechanism (removable): a plated steel cam and bolt pick-up mechanism is sup plied to enable espagnolette bolt action to be used. (Locking rods are not supplied.) Each handle has a 3" long spindle which may be cut down by user to required length. (Special spindle lengths may be supplied on a special order basis. Minimum quantity 500 one number or assorted in D-1406 Series.)

ZINC BASE DIE-CASTINGS Chrome Plated Finish

1-5/8"

3/8"

1-1/4"

3/16"

2-3/8"

5/16" SQ.

2-1/4"

5/8"

1-3/8"

1-3/4"

1-1/2"

3/16"

3" SPINDLE

1-7/16"

7/8" DIA. HOLE IN DOOR

D-1406R

For MORE HANDLES See Pages L6, L11, L33 to L53.

SPAENAUR No.

DESCRIPTION

D-1406R

Locking handle, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° anti-clockwise to open. Locking handle, with 2 keys, all to differ, for fixing to left edge of right door. Action 90 ° clockwise to open. Locking handle, with 2 keys, all keyed alike for fixing to right edge to left door. Action 90 ° anti-clockwise to open. Locking handle, with 2 keys, all keyed alike, for fixing to left edge of right door. Action 90 ° clockwise to open. Locking handle, master keyed, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° anti-clockwise to open. Locking handle, master keyed, with 2 keys, all to differ, for fixing to left edge of right door. Action 90 ° clockwise to open. Non-locking handle, for fixing to right edge of left door. Action 90 ° anti-clockwise to open. Non-locking handle, for fixing to left edge of right door. Action 90 ° clockwise to open. Dummy fixed handle, non-operating, no spindle, no locking mechanism. Acts as a door pull or to give balance to the operating handle.

D-1406L

D1406RKA

D-1406LKA

D-1406RMK

29seireS

D-1406LMK

D-1406NR

D-1406NL D-1406D

PKG QTY. 1

To order Master Keys and for Additional Data see page L2.

CATALOG 14

The quality and appearance of your product will be greatly enhanced by the use of these elegant SPAENAUR handles.

L8 19 Jan 2018

Multi-Purpose Locking Knobs / Locker Locks Boutons de verrouillage multi-usages / Serrures de casier

Inch Pouce

For steel lockers, cupboards, office furniture, electrical cabinets and equipment panels. 3-point locking mechanism (removable): a plated steel cam and bolt pick-up mechanism is supplied to enable espagnolette bolt action to be used. (Locking rods are not supplied.) Satin Chrome Finish (Escutcheon & Knob) D-1410 Series LOCKING KNOBS ZINC BASE DIE-CASTINGS 13/32" (10.319 mm)

7/32" (5.556 mm)

2-1/4" DIA. (57.15 mm)

5/16" Sq. shank

1-9/16" (39.687 mm)

1-5/8" (41.275 mm)

1-1/2" (38.1 mm)

19/32" (15.23 mm)

Shown half size

Black high-impact Styrene sleeve

3/4" (19.05 mm)

Two Fixing Screws 10-32 UNF x 1/4"

SPAENAUR

DESCRIPTION

No.

D-1410R

Locking knob, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° anti-clockwise to open. Locking knob, with 2 keys, all to differ, for fixing to left edge of right door. Action 90 ° clockwise to open. Locking knob, with 2 keys, all keyed alike, for fixing to right edge of left door. Action 90 ° anti-clockwise to open. Locking knob, with 2 keys, all keyed alike, for fixing to left edge of right door. Action 90 ° clockwise to open. Locking knob, master keyed, with 2 keys, all to differ, for fixing to right edge of left door. Action 90 ° anti-clockwise to open. Locking knob, master keyed, with 2 keys, all to differ, for fixing left edge of right door. Action 90 ° clockwise to open. Dummy fixed knob, non-operating, no spindle or locking mechanism. Acts as a door pull, or to give a balance to the operating knob.

D-1410L

D-1410RKA

D-1410LKA

29seireS

D-1410RMK

D-1410LMK

D-1410D

PKG QTY. 1

To order Master Keys and for Additional Data see page L2.

D-1415 Series LOCKER LOCKS For use on metal and wooden lockers, cabinets, drawers, etc. 7-lever master keyed mechanism operating an extruded brass bolt. The lock bolt protrudes 1/4" when shot. Die-cast cap and nozzle, with a plated steel back plate. The lock has a chromatised finish. Two nickel plated steel keys are supplied with each lock. 1,800 key changes are available.

Also available keyed alike.

9/16"

1/4"

1-11/16"

1-1/2"

2-5/8"

CATALOG 14

5/8" DIA.

23/32"

SPAENAUR No.

2-1/4"

Description D-1415MK Locker lock, master keyed, with 2 keys, all to differ. D-1415KA Locker lock, master keyed, with 2 keys, all keyed alike. Order Master Keys Separately. D-1415KM Master key

FIXING HOLES 15/64" DIA.

1/4"

PKG QTY. 1

L9 19 jan 2018

Cam Locks & Latches Serrures et loquets à came

Inch Pouce

D-1411,-12-13 Series CAM LOCKS For steel cabinets, lockers, drawers, office equipment, control panels, vending machines, meters, etc. Featuring attractive square escutcheon design. 3/4" long under escutcheon to locking cam. Locking cams can be assembled in four different positions by the user: 90 ° -180 ° -270 ° -360 ° . Standard straight cam as shown. (Other cams available to special order.) 180 ° movement of key one way, either clockwise or anti-clockwise as required, key being free in both positions. (Other movements available to special order.) FIXING: The lock is fixed by means of a double pronged spring clip, specially designed to permit secure fixing by the quickest possible means and without having to take off the locking cam. The lock is offered to a fixing hole

(formed to the dimensions on the drawing) and pushed home. The lock can be used on any material thicknesses from .024" to .080". ( .61 mm to 2.03 mm ). A special removal tool may be supplied if required (to special order).

ZINC BASE DIE-CASTINGS Chrome Plated Finish

1" 5/8"

3/16"

3/4" NOMINAL

.653"

To order Master Keys and for Additional data see Page L2.

.377" RAD.

1-5/32"

3/4" DIA.

PKG QTY. 1

SPRING STEEL HOLDING CLIP

SPAENAUR No. For Material Thickness .024"-.048" .048"-.072" .073"-.080" D-1411 D-1412 D-1413 D-1411KA 096-H07-1N D-1413KA

FIXING HOLE DIMENSIONS

Description

Cam lock, with 2 keys, all to differ. Cam lock, with 2 keys, all keyed alike.

Series 92

D-1411MK

D-1413MK

Cam lock, master keyed, with 2 keys, all to differ.

D-3006 Series CAM LOCKS For steel and wooden cabinets, lockers, drawers, office furniture and equipment, cubicles, control panels, vending machines, meters, etc. Manufactured to English standards. 3/4" long under escutcheon to locking cam. Locking cams can be assembled in four different positions by the user: 90 ° -180 ° -270 ° -360 ° . Standard straight cam as shown. (Other cams available to special order). 90 ° clockwise movement of the key from the locked position. Key is retained in lock in unlocked position. (Other movements available to special order.)

FIXING HOLE DIMENSIONS

ZINC BASE DIE-CASTINGS Chrome

To order Master Keys and for Additional data see Page L2.

5/8"

3/16"

3/4"

.653"

1-5/32"

.377" RAD.

Plated Finish

3/4" DIA.

PKG QTY. 1

Description

SPAENAUR No. 096-H08-1T 096-H06-1C D-3006MK

Cam lock, with 2 keys, all to differ. Cam lock, with 2 keys, all keyed alike.

Series 92

Cam lock, master keyed, with 2 keys, all to differ.

110-155 SPAENAUR No. Straight Notched Cam Steel, Heat Treated, Zinc (Yellow) Plated

Fits 5/16" sq. shaft

Cam will fit Cam Lock Series: D-1411, See this page. D-1414, on following page.

CATALOG 14 CATALOG 14.08

3/16"

19/64"

1-3/16"

39/64"

D-3006, See this page. 110-154, See page L13.

7/32"

30°

Cam thickness 5/64 "

5/32"

PKG QTY. 10

L10

Cam Latches & Locks / Tee Handles Loquets à came et serrures / poignées en T

Inch Pouce

D-1414 Series CAM LOCKS (Utility Locks) For steel and wooden cabinets, lockers, drawers, office furniture and equipment, cubicles, control panels, vending machines, meters, etc. Manufactured to North American standards. 5/8" long under escutcheon to locking cam. Locking cams can be assembled in four different positions by the user: 90 ° - 180 ° - 270 ° - 360 ° . Standard straight cam as shown. (Others cams available to special order). 180 ° movement of key one way, either clockwise or anti-clockwise as required, key being free in both positions. (Other movements available to special order.) FIXING: The lock is fixed by means of a nut. Additional data on Page L2.

Chrome Plated Finish

5/8"

9/32"

3/32"

5/8"

.653 "

For Straight Hooked Cam - See Page L10.

ZINC BASE DIE-CASTINGS

1-5/32"

.377" RAD.

7/8" DIA.

FIXING HOLE DIMENSIONS

DESCRIPTION

SPAENAUR No.

D-1414

Cam lock, with 2 keys, all to differ. Cam lock, with 2 keys, all keyed alike.

D-1414KA D-1414MK

Series 92

Cam lock, master keyed, with 2 keys, all to differ.

To order Master Keys see page L2.

PKG QTY. 1

Series 92

TEE HANDLES

Each handle has a 5" long spindle which may be cut by user to required length. (Special spindle lengths may be supplied on a special order basis. Minimum quantity 500 of one number on special spindle length orders.) For Automotive and Multi-Purpose Applications

For additional data see page L2.

ZINC BASE DIE-CASTINGS

Chrome Plated

(9.525 mm)

3/8"

HOLE 7/8" DIA . (22.225 mm)

Center to Center

1-3/4"

(44.45 mm)

(5.556 mm) TWO HOLES 7/32" DIA.

4" (101.6 mm)

Spindle in 5/16" square

Flat Escutcheon

1-3/4" (44.45 mm)

90°

1-3/4" (44.45 mm)

HANDLE OPERATES 90° CLOCKWISE LOCKED IN VERTICAL POSITION SHOWN

Escutcheon Holes 1-3/4" Centre to Centre

CATALOG 14

SPAENAUR No. DESCRIPTION 096-240

Locking handle, with 2 keys, all to differ. Action 90 ° clockwise to open. Locking handle, with 2 keys, all keyed alike. Action 90 ° clockwise to open.

096-242

PKG QTY. 1

All above No's. for fixing to Right or Left edge.

See page L8 for more Tee Handles.

L11 19 Jan 2018

Cam Latches & Locks Loquets à came et serrures

Inch Pouce

These attractive, low-profile latches have universal use because of their clean, modern appearance. For use on light cabinet doors and panels, up to 1/4" thick, they have a detent to help the user to know when the latch is fully open or fully closed. Each latch is supplied with a loose locking nut. The standard latching cam is straight. Other latching cams, including offset, can be supplied.

110-144 (Mfr. #520-XA) Quarter-Turn LATCH ASSEMBLY

. 08

PKG QTY. 1

90° CAM ROTATION

.41 R.

1.00

.760 .765

.87 DIA.

.21

Has a slot for use with a screwdriver.

.630 .635

.59

R. Suggested Panel Cutout

.62 FLAT

Finish: Chrome & Zinc Plate

.08

110-145 (Mfr. #521-XA) Quarter-Turn LATCH ASSEMBLY

.25 HEX HOLE .20 DEEP

90° CAM ROTATION

PKG QTY. 1

.41 R.

1.00

.760 .765

.87 DIA.

.21

Has a 1/4" hex receptacle for use with a hex tool.

.630 .635

.59

R. Suggested Panel Cutout

.62 FLAT

Finish: Chrome & Zinc Plate

.08

110-146 (Mfr. #522-XA) Quarter-Turn LATCH ASSEMBLY

1.00

90° CAM ROTATION

PKG QTY. 1

.41 R.

Has black zinc die-cast knob for finger actuation.

.87 DIA.

.62

.760 .765

.630 .635

.17

R. Suggested Panel Cutout

.59

.62 FLAT

Extra Locking Nut 155-373

.08

Plated Steel Parts Latching Cams Available

.38" (9.6 mm)

.25" (6.4 mm)

CATALOG 14

(for above latches) Zinc Plated Steel

110-147 Straight Latching Cam (Included with above Latches)

PKG QTY. 10

110-149 3/8" offset Cam

110-148 1/4" offset Cam

L12

Cam Latches & Locks / Waterproof Cover Loquets à came et serrures / couvercle étanche

Inch Pouce

(Chrome Plated) 110-154

7/16"

Slot-type Lock

Slot-type Lock - 90 ° Rotation This model is with a diecast slotted plug instead of locking device. This enables the lock to be opened with a coin, or screwdriver. Finish is bright chromium plated.

1-1/16"

3/4"

See page L10 for Straight Notched Cam

D. Slot detail 0.1" x 0.2" max. depth E. Body depth 0.75"

110-151 (Black Finish) Triangular Key Locks

7/16"

Triangular or Square Key Lock 90 ° Rotation Ideal for fairly rugged, outdoor applications, this lock provides reasonable security at low cost with cranked latch bar as standard. Finish is black plug and housing or bright Chromium plated. The lock rotates through 90 ° as standard.

3/4"

1-1/16"

F. Plug detail 0.312" (8 mm) H. Body depth 0.75"

876-799 Triangular Key for SPAENAUR No. 110-151

STEEL - Zinc Plated

110-032 (Black Finish) 110-033 (Chrome Plated) Square Key Locks

876-1133 Square Key for SPAENAUR No. 110-032 or 110-033

7/16"

1-1/16"

3/4"

STEEL Zinc Plated

G. Plug detail 0.312" (8 mm) H. Body depth 0.75" H

Locks and Keys

PKG QTY. 1

Cams can be set at 8 different positions and reversed angle.

SPAENAUR No. 317-522

Inside Cap Approx. 1" I.D. Outside Cap Approx. 1-1/8" O.D.

CATALOG 14

Approx. 13/16" I.D.

(Fits Quarter-Turn Latches above.) Waterproof Cover for Compartment Locks Black Polyethylene

PKG QTY. 10

L13

Cam Latches & Locks Loquets à came et serrures

Inch Pouce

with 90 ° movement Mini Handle

FIXING HOLE SIZE (MIN.)

(30 mm) 1-3/16"

5/8"

(15.95 mm)

Black Matt Finish

(40 mm) 1-9/16"

096-036 keyed alike 096-037 keyed to differ, non-mastered

(19.13 mm) 3/4"

(20 mm) 25/32"

PKG QTY. 1

Cam and Housing Nut included. Two keys supplied with each lock.

For Metal Cabinets, electrical enclosures and electrical panels.

Supplied with cam locked at 12 o’clock, nut assembled on housing.

CAM LOCK

AVAILABLE IN 3 HOUSING LENGTHS

096-038 096-039 096-040

“X” =7/8" (22 mm) “X” =1-1/16" (27 mm) “X” =1-1/4" (32 mm)

“X”

1-1/2"

FIXING HOLE SIZE

(38 mm)

STEEL, Chrome

3/4"

7/8"

Plated Finish

(19.13 mm)

(22 mm)

21/32"

7/8"

PKG QTY. 1

3/16"

(16.6 mm)

(22 mm)

(5 mm)

PRONGED WASHER We recommend the use of a washer when fitting lock in wooden panels. WASHER MUST BE ORDERED SEPARATELY. (See 096-041 below.)

180 ° clockwise movement of key from locked position. Key free in both locked and unlocked positions. Two keys supplied with each lock. Keyed to differ.

(1.2 mm)

3/64"

1-5/16"

(33.75 mm )

STEEL - Zinc Dichromate Plated Finish SPAENAUR No. 096-041

(19.13 mm) 3/4"

13/16"

(20.6 mm)

PKG QTY. 1

Can be used on Cam Lock above and others listed in this catalog, especially when used on wood panels.

21/32"

(6 mm) 15/64"

(16.75 mm)

Thin Hexagon Locknut

STEEL - Zinc Plated Thread: 3/4"-24 Across Flat: 7/8" Thickness: 3/16"

Nylon Hex Jam Nut 163-058 3/4”-27 (pg.C8) will fit SPAENAUR Cam Locks listed below.

CATALOG 14

SPAENAUR No. 155-373

D-1414 Series (pg. L11) D-3006 Series (pg. L10)

PKG QTY. 10

Above locknut 155-373 will fit SPAENAUR Cam Locks 110-144 to 110-146 (pg. L12).

L14

Cam Latches & Locks Loquets à came et serrures

Inch and Metric Pouce et Métrique

Sliding Door Ratchet Lock SPAENAUR No. 096-247 Steel Polished Nickel

PKG QTY. 1

2 Keys included. (keyed to differ)

Ratchet locks are specifically designed for sliding cabinet doors. This useful lock has a screw-adjustable bar for thicker glass or other materials, up to 1/4" thick.

Operation - Standard key may be removed in locked & unlocked position.

Glass Sliding Door Pin Lock

1.5

Steel Bright Chrome SPAENAUR No. 096-245 2 Keys included. (keyed to differ)

12.5

10.5

Ø 34

Ø 22

Ø 8

The lock is suitable for fixing to glass panels 3.0 mm - 6.0 mm in thickness.

PKG QTY. 1

Ø 30

Push to engage lock. Use key that is supplied to release lock.

(Dimensions in mm)

Sliding Door Pin Lock

SPAENAUR No. 096-246 2 Keys included. (keyed to differ)

2.5

Steel Bright Chrome

45°

CATALOG 14 51 35

Ø 22

Ø 8

KEY FREE POSITION

Ø 8

PKG QTY. 1

STANDARD MOVEMENT (SPRING RETURN)

Ø 4.5

12.5

(Dimensions in mm)

Push to engage lock. Use key that is supplied to release lock.

L15

Draw Latches / Magnetic Catches Loquets à levier�/ loquets aimantés

Inch Pouce

Countersunk for No. 6 Screws

1 "

2 "

For Suitcases, Chests, etc. 096-617 Steel, Brass Plated

096-605 Steel, Brass Plated

PKG QTY. 10

PKG QTY. 1

1 "

MAGNETIC CATCH and STRIKE SETS

1 "

ALUMINUM CASE 2" x 1" x 5/8"

3 "

Countersunk for No. 6 Screws

STRIKE 1-1/8" x 3/4"

Countersunk for No. 6 Screws

096-352

CATALOG 14 CATALOG 14.11

096-H13-1M Steel, Zinc Plated (without Padlock Eye)

096-647 Steel, Brass Plated (without Padlock Eye)

Aluminum Case (Plain Finish) with Steel Strike and Screws

PKG QTY. 12 SETS

PKG QTY. 2

L16

CLAMP FASTENERS with Padlock Eye PLAIN and ZINC PLATED STEEL and 300 STAINLESS STEEL Ensembles de loquets à levier / loquets à ressort Draw Latches/Spring Catch Assemblies

Inch and Metric Pouce et Métrique

9/16"

9/16" 1"

1/2"

3/16"

13/64" HOLES

.083

1-1/16"

Dimensions are to centre lines of attaching holes.

1-7/8"

.165" DIA.

Approx. Actual Size

3-13/16"

7/32" HOLES

1-17/32" .109"

The preferred lockable fastener for Tool Kits, Chests, etc.

3/8"

7/32"

ZINC PLATED with riveting holes 096-601 Strike and Catch

300 STAINLESS STEEL with riveting holes 096-H05-1Y Strike and Catch 096-H04-1P Strike only 096-808 Catch only

PLAIN STEEL for Spot-Welding (no holes) 096-602 Strike and Catch

096-598 Strike only 096-599 Catchonly

096-596 Strike only 096-597 Catchonly

PKG QTY. 10

PKG QTY. 1

SPRING CATCH and STUD ASSEMBLIES BALL STUDS - Steel, Zinc Plated. STEEL SPRING CATCHES

TYPICAL ASSEMBLY

Catches are dimensionally identical. Material thickness and pull-out tensions differ. SPAENAUR No's. 2 Holes .135" Dia.

3/32" Spherical Radius

SPAENAUR No. C-968 Internal Thread 6-32 NC2

.102"

.525"

.231"

086-692 Zinc Plated T = .017" Pull-out Tension 8 lbs. C-788 Phosphate Finish T = .022" Pull-out Tension 12 lbs. 086-690 Phosphate Finish T = .031" Pull-out Tension 30 lbs.

.432

.320"

1/4" Hex

7/16"

CATALOG 14

P (Panel Range) .133" - .160"

3/32 Spherical Radius

SPAENAUR No. 086-689 External Thread METRIC Coarse M4 x 0.70 Pitch 6 mm Long.

.102"

11/16"

.231"

Note: Components must be ordered separately. (See page C92 for more information.)

31/32"

11/16"

3/8"

1/4"

6 mm

1/4" HEX

PKG QTY. 100

L17 19 Jan 2018

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200

Made with FlippingBook Digital Publishing Software