Section C

Threaded Insert Kit with Installation Tool

Inch Pouce

Douilles On-Serts / Outils d'installation pour inserts filetés

THREADED INSERT SETTING TOOL KITS - Inch or Metric Housed in a compact plastic tool box for easy storage. Each kit includes one hand setting tool, 4 conversion kits and four sizes of 10 inserts each for either inch or metric applications.

Designed for quick, manual insertion of permanent load bearing threads in materials from 0.020” to 0.128” (0.51mm to 3.25mm) thickness. The setting tool has been designed to enable threaded nut inserts to be set easily by hand. Invaluable to maintenance engineers for on-the-spot repairs. Simple setup and easy uniform stroke allows a nutsert to be set in thin sheet materials without causing surface damage. Benefits: One side application, flush mounting, permanent thread, moisture resistant, cost effective, strong, vibration resistant and portable. SPAENAUR No. 876-1807 INCH KIT contains the tool, mandrels and 10 inserts

C

SPAENAUR No. 876-1835 METRIC KIT contains the tool, mandrels and 10 inserts of each size listed below to install metric coarse threads for: M4 thread with 0.51 mm to 1.27 mm grip range M5 thread with 0.51 mm to 1.27 mm grip range M6 thread with 0.76 mm to 1.68 mm grip range M8 thread with 0.91 mm to 3.25 mm grip range

of each size listed below to install threads for: 8-32 UNC thread with 0.020” to 0.050” grip range 10-24 UNC thread with 0.030” to 0.066” grip range 10-32 UNF thread with 0.030” to 0.066” grip range 1/4”-20 UNC thread with 0.036” to 0.128” grip range

Threaded Inserts Dodge ® offers a full line of threaded inserts for plastics including brass inserts to suit almost any insert application in plastic. Inserts can be installed using virtually all methods of installation. • The WELL-NUT ® threaded insert is a flanged chloroprene bushing with a brass machine nut molded into one end. Tightening a conventional machine screw threaded in the brass nut causes the insert to expand, creating a secure fastening. • The JACK NUT ® threaded insert is an economical blind fastener designed for assembly line use in thin, soft, or brittle materials. When tightened, the body collapses to form four legs which grip the inside of the mounting surface, leaving a permanent, reusable threaded insert. • Other Threaded Inserts (available in brass, stainless steel and low carbon steel) are ideal for plastics, alloys and composite materials. They are designed to provide strong metal threads for machine screws.

CATALOG 14

C198 19 Jan 2018

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com