Section C

Inserts Type SKDZ & SKD Inserts de types SKDZ et SKD

Inch and Metric Pouce et Métrique

NEW

RAMPA-INSERTS TYPE SKDZ

INCH AND

METRIC

Best Application: Soft Woods, Plywood & Chipboard.

C

C

RAMPA-INSERTS TYPE SKDZ Internal Thread Size (d) SPAENAUR No.

O.D. (D) Length (L) Key Size (SW) Finish

PKG QTY.

625-B22-1Y 625-C01-1W 625-B23-1C 625-B25-1T 625-B24-1N 625-B20-1A 625-B21-1P 625-A40-1P 625-A41-1Y 625-B13-1T 625-B14-1K 625-A42-1C 625-A43-1N 625-B15-1W 625-B16-1M 625-B17-1X 625-A44-1T 625-B18-1A 625-A45-1K 625-B19-1P

1/4-20 1/4-20 1/4-20 3/8-16 5/16-18

12.5 mm 13 mm 6 mm 12.2mm 20mm 6 mm 12.5 mm 25 mm 6 mm 16 mm 13 mm 10 mm 14.5 mm 13 mm 8 mm 8.5 mm 10 mm 4 mm 11.5 mm 13 mm 5 mm 8.5 mm 10 mm 4 mm 11.5 mm 13 mm 5 mm 11.5 mm 10 mm 5 mm 11.5 mm 20 mm 5 mm 12.5 mm 13 mm 6 mm 12.5 mm 20 mm 6 mm 12 mm 10 mm 6 mm 12.5 mm 16 mm 6 mm 12.5 mm 25 mm 6 mm 14.5 mm 13 mm 8 mm 14.5 mm 18 mm 8 mm 16 mm 13 mm 10 mm 16 mm 25 mm 10 mm

Blue Zinc 50 Blue Zinc 50 Blue Zinc 50 Blue Zinc 50 Blue Zinc 50 Blue Zinc 50 Blue Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50 Yellow Zinc 50

8-32 10-24

M4 M5 M5 M5 M6 M6 M6 M6 M6 M8 M8

M10 M10

NEW

RAMPA-INSERTS TYPE SKD

INCH AND

METRIC

Best Application: Hard, Medium Density & Soft Woods, Plywood & Chipboard.

RAMPA-INSERTS TYPE SKD Internal Thread Size (d) SPAENAUR No.

O.D. (D) Length (L) Key Size (SW) Finish PKG QTY.

625-A99-2A 625-B01-2T 625-B03-2W 625-B02-2K 625-A97-2M 625-A98-2X 625-A91-1Y 625-A92-1C 625-A93-1N 625-A94-1T 625-A95-1K 625-A96-1W

1/4-20 1/4-20 3/8-16 5/16-18

12 mm 12 mm 6 mm 12 mm 15 mm 6 mm 18.5 mm 20 mm 10 mm 14 mm 15 mm 8 mm 8 mm 8 mm 4 mm 10 mm 12 mm 5 mm 8 mm 8 mm 4 mm 10 mm 12 mm 5 mm 12 mm 12 mm 6 mm 12 mm 15 mm 6 mm 14 mm 15 mm 8 mm 18.5 mm 20 mm 10 mm

Zinc 25 Zinc 25 Zinc 10 Zinc 25 Zinc 50 Zinc 50 Zinc 50 Zinc 50 Zinc 25 Zinc 25 Zinc 25 Zinc 10

CATALOG 14

For insert tools see pages

8-32 10-24

C178-C180. Refer to the

M4 M5 M6 M6 M8

RAMPA Pre-bore Reference Chart on pages C181 C182.

M10

C163

RAMPA ® is a registered trademark of HANS BRÜGMANN GmbH & Co., Germany

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com

20 NOV 2018