Section C

Test Data

Inch and Metric Pouce et Métrique

Données de test

AVK TEST DATA

A-L, A-K, A-H Series product was tested with the -4 finish. R-N Series was Cadmium plated.

PULL-OUT

PUSH-OUT SPIN-OUT*

1.57 mm .062 in. IN ALUM

IN STEEL SHEET

IN ALUMINUM SHEET

IN STEEL IN STEEL

ASSEMBLY TORQUE

THREAD SIZE A-L / A-K SERIES A-H SERIES R-N SERIES 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 1/2-13 M4 M5 M6 M8 M10 M12 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 M4 M5 M6 M8 M10 1/4-20 5/16-18 3/8-16 1/2-13 M6 M8 M10 M12

C

C

.030 in.

.062 in.

.090 in.

.125 in.

.030 in.

.062 in.

.090 in.

.125 in.

.125 in.

1.57 mm .062 in.

0.76 mm 1.57 mm 2.28 mm

3.17 mm 0.76 mm

1.57 mm 2.28 mm 3.17 mm 3.17 mm

310 310 460 460 510 520 520

850 850

1570 1570 1730 1730 2090 2380 2380 3040 10.6 10.6 13.5 990 990 1670 1670 1780 1870 1870 7.0 7.7 9.3

1830 1830 2670 2670 3250 3810 3810 4480 8.1 11.9 14.5 17.0 17.0 19.9 2520 2520 2690 2280 2280 3.8 11.2 12.0 10.1 10.1 860 860

320 320 440 440 490 500 500

830 830

1450 1450 1700 1700 1920 2230 2230 2940 6.5 7.6 8.5 9.9 9.9 13.1 1550 1550 2240 1680 1680 3.7 6.9 10.0 2100 2244 2110 2643 9.3 9.9 9.3 11.7 830 830 7.5 7.5

1580 1580 2380 2380 3020 3670 3670 4350 7.0 10.6 13.4 16.3 16.3 19.4 2050 2050 3210 2890 2890 840 840

12 22 32 36 75

1020 1020 1270 1370 1370 2000

1000 1000 1180 1350 1350 1830

156 276 660

1.4 2.0 2.3 2.3 2.3

3.8 4.5 5.7 6.1 6.1 8.9 660 660 990 990

1.4 2.0 2.2 2.2 2.2

3.7 4.5 5.3 6.0 6.0 8.1

2.5 5.0 8.6

21.0 42.0 72.0

270 270 420 420 460 480 480

270 270 380 380 430 460 460

660 660 880 880

40 40 80 80

40 40 70 70 90

12 22 32 36 75

1150 1110 1110

1530 1050 1050

130 240 240

230 230

156 276

1.2 1.9 2.0 2.1 2.1

2.9 4.4 5.1 4.9 4.9

4.4 7.4 7.9 8.3 8.3

1.2 1.7 1.9 2.0 2.0

2.9 3.9 6.8 4.7 4.7

3.7 9.1

4.5 9.0

4.5 7.9

2.5 5.0 8.6

14.3 12.9 12.9

14.7 27.1 27.1 100 180 320 450 16.8 30.3 40.2 53.3

10.2 25.5 25.5 60 110 120 220 10.6 12.7 13.5 48.8

21.0 42.0 75 156 276 660 8.6 21.0 42.0 72.0

350 580 630 620

860 1210 1230 1320

1770 2010 2050 2240

400 540 590 780

850 1110 1180 1390

2000 2690 3700 3880 8.8 11.9 16.4 17.2

1.5 2.5 2.7 2.7

3.7 5.3 5.4 5.8

7.8 8.9 9.0 9.9

1.7 2.6 2.6 3.4

3.7 2.9 5.2 6.1

NOTE 1: Ultimate torque testing should be done using actual customer components and mating hardware due to plating/lubrication variables. AVK’s fasteners have been designed to exceed the ultimate torque strength of the appropriate grade/class of mating hardware. NOTE 2: For test data on other AVK products, contact Spaenaur Sales Desk for details. *NOTE 3: R-N Series Spin-out. Test drop values are keyed steel rivet nuts tested in steel plates and keyed aluminum rivet nut tested in 2024-T4 aluminum plates.

CATALOG 14 CATALOG 14.11

C153 18 MAY2023

AVK ® is a registered trademark of AVIBANK MFG., INC.

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com