Section C

Product Information Information sur les produits

Inch and Metric Pouce et Métrique

DESIGN CONSIDERATIONS/APPLICATION CHECKLIST The following BEST PRACTICE information should be considered to insure proper application design when using AVK fasteners. If you have any application questions, please contact a Spaenaur Sales Representative.

C

PARENT MATERIAL

The parent material should be dense enough to support the hole ll and clamp load applied by the AVK fastener during installation. Its thickness should be within the grip range of the AVK fastener. Experimentation is suggested to determine optimum fastener selection for plastics.

HOLE SIZE

The hole produced in the parent material should be per the AVK speci cations. Tolerance for paint or coating buildup should be included to avoid an undersized hole condition. The hole should be square to the parent material.

90 °

AVK PART ACCESS

The AVK fastener head should sit at on the parent material. An obstruction to the tail of the AVK product or to the access of the power tool can be corrected by contacting Spaenaur for alternative fastener designs and tooling con gurations. The AVK tool should be held perpendicular to the application to avoid excess mandrel wear.

BACKSIDE SURFACE

The backside surface of the parent material should not contain a punch slug or excessive burr that exceeds the grip range of the AVK fastener. Such large obstructions may prohibit the AVK fastener from installing properly.

BURR or TAB

CATALOG 14 CATALOG 14.10

C150 22 NOV 2022

AVK ® is a registered trademark of AVIBANK MFG., INC.

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com