Section C

Inserts

Inch and Metric Pouce et Métrique

Inserts

A-O SERIES ™ PROFILE

The A-O Series Insert features a reduced pro le head design which is similar to the superior A-K Series Insert. It also has a smaller body diameter than the A-K Series Insert. The A-O Series Insert can be speci ed when the application design parameters require a smaller hole or closer hole to edge tolerances. The A-O Series can be installed with AVK’s ARO brand pneumatic tools or AVK’s pneumatic/hydraulic SPP2 Tool™. These tools can be located at any position on your assembly line. The A-O Series can be installed either prior to or after nish further enhancing its exibility in your manufacturing environment.

C

UNIFIED (INCH) AND METRIC THREAD

HH

HD

IL

GRIP RANGE

L

Thread Speci cations: Uni ed 2B/21 per ASME B1.1 Metric 6H/21 per ASME B1.13M

D

STEEL ZINC TRIVALENT

AIR INSTALLATION TOOL TOOL

1/4 (.250) 1/4 (.250) 19/64 (.2969) HOLE SIZE +.006 / -.000

SPAENAUR No.

MANUFACTURER No. AOS3T-632-80 AOS3T-832-80 AOS3T-1032-130 AOS3T-420-165 AOS3T-428-165 AOS3T-518-200 AOS3T-524-200 AOS3T-616-200 MANUFACTURER No. AOS3T-470-2.0 AOS3T-580-3.3 AOS3T-610-4.2 AOS3T-8125-5.1 AOS3T-1015-5.10

THREAD SIZE

HD ±.010

L ±.015

D MAX. .249 .249 .296

IL MAX. .315 .315 .315

PKG QTY.

HH ±.003

GRIP RANGE

ADAPTION KIT

TAA912-30P TAKPT632TAK TAA912-30P TAKPT832TAK TAA912-15P TAKPT1032TAK TAA912-15P TAKPT420TAK TAA912-15P TAKPT428TAK TAA912-6P TAKPT518AK TAA912-6P TAKPT1524TAK TAA912-6P TAKPT616TAK

215-A88-1C 215-A53-1N 215-A71-1M 215-A39-1N 215-A59-1A 215-A46-1X 215-A89-1N 215-A25-1Y

6-32 UNC 8-32 UNC 10-32 UNF 1/4-20 UNC 1/4-28 UNF 5/16-18 UNC 5/16-24 UNF 3/8-16 UNC

.300 .300 .340 .425 .425 .560 .560 .560

.020 - .080 .020 - .080 .020 - .130 .030 - .165 .030 - .165 .040-.200 .040 - .200 .040 - .200

.018 .018 .019

.385 .385 .475

100 100 100 100 100

3/8 (.375) 3/8 (.375) 1/2 (.500) 1/2 (.500) 1/2 (.500)

.022 .580 .374 .440

.022

.580

.374

.440

.022 .690 .499 .540

50 50 50

.022 .022

.690 .690

.499 .499

.540 .540

AIR INSTALLATION TOOL TOOL

HOLE SIZE +0.15 / -0.00

SPAENAUR No.

THREAD SIZE

HD ±0.25

L ±0.38 9.78 11.18 14.73 17.53 17.53

D MAX. 6.32 7.11 9.50 12.67 12.67

IL

PKG QTY.

HD ±0.08

GRIP RANGE

ADAPTION KIT

MAX.

216-K08-1M 216-K10-1M 216-K21-1W 216-K39-1C 216-K40-1Y

TAA912-30P TAKPT470TAK TAA912-15P TAKPT580TAK TAA912-15P TAKPT610TAK TAA912-6P TAKPT8125TAK TAA912-6P TAKPT1015TAK

M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M8 x 1.25 ISO M10 x 1.5 ISO

7.49 8.13

100 100 100

6.4 7.2 9.6

0.50 - 2.00 0.50 - 3.30 0.76 - 4.20 1.02 - 5.10 1.02 - 5.10

0.46 0.51 0.56 0.56 0.56

8.00 8.38

10.80 14.22 14.22

11.18 13.72 13.72

50 50

12.7 12.7

NOTE 1: Grip range can be a ected by parent material density and actual hole size. AVK suggests trial installations to determine optimum grip. NOTE 2: Additional UNF ne threads are available. Contact Spaenaur Sales Desk for details. NOTE 3: Additional nishes are available – Yellow Zinc Trivalent & Tin Zinc Trivalent.

CATALOG 14 CATALOG 14.10

For more hand tool selection and specifications see pages C146-C148

C134 05 JAN 2023

AVK ® is a registered trademark of AVIBANK MFG., INC.

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com