Section C

SPINWALL TECHNOLOGY™

SPINWALL TECHNOLOGY MC

Spinwall Technology™ ...Sets AVK apart

You will notice throughout these pages references to the phrase Spinwall Technology™. This phrase describes the philosophy of AVK’s product’s design, manufacturing and installation systems.

Spinwall Technology™ products are manufactured on high-speed, state-of-the-art cold forming equipment on which very precise tolerances are achieved. This capability allows AVK to produce products with unique mechanical and installation properties that result in the AVK product lling the hole prior to backside ange formation. Read more about hole ll and the other advantages of Spinwall Technology™ on the separate product pro le pages. Our Spinwall Technology™ products can be installed using three di erent types of installation tooling...

C

C

The ARO pneumatic stall torque type tool installs AVK as follows… ARO PNEUMATIC STALL TORQUE TOOL

1

2

3

Depress the top trigger until the tool stalls and the AVK fastener is collapsed.

Depress the lower trigger and the tool unthreads from the installed part.

1/4 turn the fastener onto the ARO tool mandrel and place the fastener into the hole.

AVK SPP TOOL™ - SPIN PULL TO PRESSURE

The SPP Tool™ utilizes an ARO pneumatic stall torque tool and incorporates an integrated hydraulic cylinder powered by a remote hydraulic power pack system.

1

2

3

Depress the tool trigger and the tool spins into the fastener and automati cally exerts a pressure controlled pull installing the fastener.

Depress the tool reverse trigger and the tool spins out of the installed fastener.

1/4 turn the fastener onto the SPP Tool™ mandrel and place the fastener into the hole.

AUTOMATION

Automation bene ts are as follows: Labor savings Single or multi-simultaneous insert installation Maximum up-time providing optimal production output Multiple work station con gurations are available Robotic arm with hole locating vision system is available Insert collapse load can be veri ed

CATALOG 14

C127

AVK ® is a registered trademark of AVIBANK MFG., INC.

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com

23 Jan 2018