Section C

Test Data

Inch and Metric Pouce et Métrique

Données de test

AVK TEST DATA The test data on this page is intended to provide the designer with approximate strength values in various materials and thicknesses. The gures shown are averages of multiple tests. AVK recommends that this data be used only as a guide since various application factors may a ect AVK product performance. We recommend testing your application when an exact strength gure is required or the load to be applied comes close to the published data. Uni ed (Inch) thread size data is provided in pounds (lbs.) for force and inch pounds (in-lbs.) for torque. Metric data is provided in kilonewtons (kN) for force and newton meters (Nm) for torque.

C

PULL-OUT

PUSH-OUT

S

PULL-OUT is the force required to pull the AVK product from the parent material. The parent material is restrained by a hold down ring 3x the AVK part “D” dim.

PUSH-OUT is the force required to push the AVK product through the parent material. The parent material is supported by a hold down ring 3x the AVK part “D” dim.

SPIN-OUT

ASSEMBLY TORQUE

ASSEMBLY TORQUE

NON-ROTATIONAL MATING PART

NON-ROTATIONAL MATING PART

SPIN-OUT is the torque required to turn the AVK product in the parent material after installation without in uencing clamp load on the AVK product.

ASSEMBLY TORQUE is the amount of torque suggested for Grade 5 or Metric Class 8.8/9.8 mating hardware based on industry standards.

CATALOG 14 CATALOG 14.10

C152 22 NOV 2022

AVK ® is a registered trademark of AVIBANK MFG., INC.

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com