Section C

AVK ® Industrial Products Table of Contents Table des matières des produits industriels AVK MD

Page No.

The A-H Series ™ features a hex body design that when used in a hex hole produces the ultimate in spin-out torque resistance. This feature is important when SPC and/or a prevailing torque thread lock is required. The A-H Series can be installed after finish.

™ THREADED HEX INSERTS INSERT A-H

C128-C129

SERIES

The A-K Series ™ , similar to the A-L, features a minimized head profile that allows for nearly flush installations without the need for special hole preparations such as countersinking or dimpling. The A-K Series can be installed after finish.

A-K ™ SERIES KNURLED THREADED INSERTS INSERT

C130-C131

C

C

The A-L Series ™ features a large diameter, low profile head, making it ideal for use in punched or even hand drilled out-of-round holes. The A-L Series offers the highest all around strength characteristics and is by far AVK’s most versatile product. The A-L Series can be installed after finish. The A-O Series ™ provides very high pull-out loads particularly effective in thin metal. May be used where the AT Series insert will not generate enough pull-out in very thin materials and a hole size change cannot be made to accommodate the A-K or A-L Series inserts.

A-L ™ SERIES KNURLED THREADED INSERTS INSERT

C132-C133

A-O ™ SERIES

INSERT THREADED INSERTS

C134

A-T ™ SERIES KNURLED THREADED INSERTS INSERT

The A-T Series ™ will work in “any” thickness over .030", even in buried holes. An installation tool is used to pull a “cone” shaped nut into the sleeve expanding it into the parent material.

C135-C136

The A-W Series ® insert is ideal for use in “SOFT MATERIALS” such as plastics, fiberglass, wood, structural foam, aluminum, etc. The A-W Series insert can be used in thinner materials where the shallowest insert protrusion on the backside is desired.

A-W ® SERIES KNURLED THREADED INSERTS INSERT

C137

The R-N Series ® rivet nut features a thicker head profile ideal for use in leg-leveling applications. Manufactured on high speed, state of the art cold heading equipment, the R-N Series guarantees quality in a rivet nut. The R-N Series can be installed after finish.

® RIVET NUT THREADED INSERTS

R-N SERIES

C138-C139

CATALOG 14 CATALOG 14.11

C140-C149

Power and Hand Tools for AVK Series Inserts

C150-C156 AVK Technical and Test Data

A-L Series, A-K Series, A-H Series, A-T Series, A-O Series, R-N Series, One-Set, OST, PreSet, SPP2 Tool, SPP3 Tool Data Master, CVI, Hi-Torquer, and Spinwall Technology are Trademarks of Avibank Mfg., Inc. A-W Series, AVK and are Registered Trademarks of Avibank Mfg., Inc.

A67-68

AVK Assortments

C125

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com

11 JAN 2023