Section C

Plug Anchors / Winged & Toggle Anchors Chevilles d'ancrage / Ancrages papillons et à ailettes

Inch Pouce

ALLOY LAG SCREW EXPANSION SHIELD

Dia.

Out side

of Lag Screw

Dia. with Length and which of Drill SPAENAUR Shield Shield Re No. is used (Note) quired LONG STANDARD SIZES EX-1815-3 1/4" 1-1/2" 1/2"

PKG QTY.

C

100% rust-proof throughout For use with Lag Screws

A precision die-cast expansion shield of rust-proof alloy. Provides secure anchorage of lag screws in brick, stone, and other types of solid masonry. Heavy external corrugations assure powerful gripping action. Long and short standard sizes for lag screws. Installation

50 50 50 25

C

EX-1820-3 EX-1825-3 EX-1835-3 EX-1845-3 EX-1855-3 EX-1815-2 EX-1820-2 EX-1825-2 EX-1835-2 EX-1845-2 EX-1855-2

5/16" 1-3/4" 1/2"

3/8" 1/2" 5/8" 3/4"

2-1/2" 5/8"

3"

3/4"

3-1/2" 7/8" 3-1/2" 1"

5 5

SHORT STANDARD SIZES

1/4" 1-5/16" 1/2" 5/16" 1-1/4" 1/2" 3/8" 1-3/4" 5/8"

50 50 50 25 25 10

Precision internal shield threads per mit easy turning of lag screw without lubrication.

Drill recommended hole size. Install shield flush or slightly below surface.

Insert lag screw through fixture into shield and tighten.

1/2" 2" 5/8" 2" 3/4" 2"

3/4" 7/8"

In mortar joints, place shield between solid brick so sides bear against brick.

1"

LEAD ANCHORS

For use with Wood Screws or Sheet Metal Screws A wood screw Anchor for quick installation of lighter weight fixtures in masonry. Made of lead, it will expand without turning in soft material. Withstands extreme changes in temperatures, and is not affected by moisture or chemicals.

Outside Frac- Dia. and

Installation

Screw Size

tional

Drill

and Length Screw Re

SPAENAUR

PKG QTY.

of Anchor

Size quired

No.

EX-408-06 6-8 x 3/4" EX-408-14 6-8 x 1-1/2" EX-412-10 10-12-14 x 1"

1/8"-3/16" 1/8"-3/16" 3/16"-1/4"

1/4" 1/4"

100 100 100 100 100

For best results, screw should protrude 1/4 inch thru bottom of Anchor. Screw length should equal thick ness of fixture, plus length of Anchor, plus 1/4 inch. SPRING-WING Toggle Nuts

5/16" 5/16"

Insert wood screw through fixture into Anchor and tighten. Anchor is expanded and will hold firmly.

EX-412-14 10-12-14 x 1-1/2" 3/16"-1/4"

Drill hole 1/4 inch deeper than length of Anchor. Insert Anchor flush with surface of wall.

EX-418-10 16-18 x 1" EX-418-14 16-18 x 1-1/2"

5/16" 5/16"

3/8" 3/8"

25

Note: Bolts for use with these Toggle Nuts may be selected from any of the Inch sizes listed in Section B, pages B6 to B24. For POLYPROPYLENE Toggle Nuts See page C110.

For Bolt Sizes Size Drill

PKG QTY.

Required

SPAENAUR

TOGGLE NUTS ONLY

Thread Length (Masonry)

No.

TB-3005-6 TB-3005-8 TB-3010-6 TB-3015-6

6-32 8-32

50 50 50 50 50 50

- - -

7/16"

10-24

CATALOG 14

(without Bolts)

1/4"-20

11/16"

058-T01-1Y 5/16"-18 -

7/8"

TB-3025-6

3/8"-16

-

1"

Plated Steel

C118

See pages B74-B77 for TAPCON ANCHOR SYSTEM

P: 1-800-265-8772 F: 1-888-252-6380 www. F: 1-888-252-6380 service@spaenaur.com © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. .com

18 Jan 2018